Samsung WA48J7700AW/A2 User Manual - Page 49

Self Clean Self Clean Auto Indicator function 8 JOEE


 Self Clean is a self-cleaning cycle that removes mold that may occur inside the washer. 1. Press Power. 2. Select Self Clean. Once Self Clean is selected, the only function that can be set is Delay End. 3. Press Start/Pause. Self Clean begins. CAUTION • Using Self Clean, you can clean the drum without using a cleansing agent. • Never use Self Clean when laundry is in the washer. This may cause damage to the laundry or a problem with the washer. • If the Self Clean indicator is lit after a wash, it indicates that tub (drum) cleaning is required. In this case, remove the laundry from the washer, turn the power on, and clean the drum by running Self Clean. • If you do not run Self Clean, the Self Clean indicator turns off. However, the Self Clean indicator will light again after two washes. Not running Self Clean at this point will not cause a problem with the washer. • Although the Self Clean indicator is lit once a month or so, the frequency may differ depending on the number of times the washer is used. English 49 Maintaining your washer