Samsung WA48J7770AP/A2 User Manual - Page 23

Ao7 6 6 4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. /i\ CAUTION The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected 5 to the cold faucet must be connected to the lv cold water supply intake. 0) 5. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. @ NOTE To ensure the correct water usage, connect both the hot and cold water faucets. If either or both are not connected, an "4C" (no fill) code can be displayed. NOTE If you do not want to use the hot water supply hose, insert the water intake cap into the hot water supply intake hole. In this case, you must select the Tap Cold for the water temperature. If you select the Tap Cold, all the lamps for the water temperature options are turned off. A CAUTION Confirm that the water supply hoses are not twisted or bent. If the hoses are twisted or bent, the hoses can leak and cause electric shock due to the water leakage. 6. Turn on the hot and cold water supplies and check all the water supply intake connections and the faucets for water leaks. English 23