Sanyo CE42LM4N-NA Owner's Manual - Page 2

SAFETY PRECAUTIONS CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing. Installation airflow resricted in any way by enclosing the LCD monitor WARNING: To prevent injury the LCD monitor must be securely fixed in accordance with the manufacturers mounting installation instructions. This monitor must NOT be permanently mounted to the building structure. It must be mounted in such a way that it can be removed using basic tools. The power supply cord must NOT be attached to the building surface. The power supply cord must NOT be routed through walls, ceiling, floors, or other similar openings in the building structure. The power supply cord MUST be positioned so as to prevent physical damage. Do not allow anything to rest on the power cord. Do not locate this LCD monitor where the cord will be damaged by people walking on it. A suitable socket outlet must be provided near to the monitor and shall be easily accessible. Do not overload wall outlets as this can result in fire or electric shock. Do not place this LCD monitor near any heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers). This LCD monitor should not be built in to any structure or enclosed in any way. Heat build up will reduce the life of the monitor. Always mount using recommended and substantial fixtures and fittings. This LCD monitor should have a minimum distance of 5cm away from the wall and the monitor should have 10cm distance around the top and sides 10cm 10cm 10cm 5cm Servicing Your LCD monitor is fully transistorised and does not contain any user serviceable components. You must not remove the rear cover of the TV by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare parts can prevent fire, shock and other hazards. Do not place this LCD monitor in direct sunlight. Do not place your LCD monitor on an unstable stand, shelf or table. Serious injury to an individual, and damage to the LCD monitor may result if it should fall. Your sales person can recommend approved wall mounting kit. A special wall mounting kit is available for this model. Unplug the LCD monitor receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions: ■ If the power cord or plug is damaged. ■ If liquid has been spilt in to the LCD monitor. This LCD monitor should be operated only from the type of power source indicated on the monitor or as indicated in the Operating Instructions. If you are not sure of the type of power supply, consult your sales person or your local power company For added protection it is strongly recommended that this LCD Use monitor is supplied via an approved earth fault protection device Never add accessories that have not been specifically designed for this monitor. ■ If LCD monitor has been exposed to rain or water. ■ If the LCD monitor has been dropped or the cabinet has been damaged. ■ If the LCD monitor exhibits a distinct change in performance. ■ If the LCD monitor does not operate normally by following the operating instructions. Do not place items such as vases containing liquid on top of the monitor. Some internal parts carry hazardous voltages and contact may result in an electric shock hazard. Never spill liquids of any kind on this LCD monitor. Do not expose the LCD monitor to rain or use near water. For example, near a bathtub, kitchen sink, in a wet basement, etc. Do not use immediately after moving the LCD monitor from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Before cleaning, unplug the television receiver from the wall socket. Do not apply liquid cleaners or aerosol cleaners directly onto the LCD monitor. Use a damp cloth for cleaning. Do not mount near an open flame source. Open flames must never be used near this LCD monitor. Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician to restore the LCD monitor receiver to normal operation. The rear finned section around the cabinet functions as a heat sink, removing heat away from the monitor. The external surface of the cabinet (finned area) must not be covered or the 2