Sanyo CE42LM4N-NA RS232C Basic - Page 16

7.7 Signal status Read Command Command "CR SIGNAL" [CR] Detail Get the signal status. Acceptable "%1" [CR] Response %1 "000 No signal = No signal "000 Signal exists" = Signal exists. Unacceptable "%1" [CR] 7.8 Child lock setting Read Command Command "CR CHILD" [CR] Detail Get the child lock setting. Acceptable "%1" [CR] Response %1 "000 OFF" = OFF "000 ON" = ON Unacceptable "%1" [CR] 7.9 Power save setting Read Command Command "CR PSAVE" [CR] Detail Get the PSAVE setting . Acceptable "%1" [CR] Response %1 "000 OFF" = OFF "000 ON" = ON Unacceptable "%1" [CR] 7.10 Panel usage time Read Command Command "CRTM" [CR] Detail Get the Panel Usage Time Acceptable "%1" [CR] Panal Usage Time in hour by 5 digits. Response %1 Ex. "00123" This means 123 hours Unacceptable "?" [CR] 7.11 RC inhibition Read Command Command "CR RMC" [CR] Detail Get the Remote Control inhabitation state Acceptable "%1" [CR] Response %1 "000 OFF" = OFF : operable "000 ON" = ON : inoperable Unacceptable "?" [CR] Ver. Page 15