Sanyo MPR-1013R Instruction Manual - Page 15
Attachment of recorder MTR-G04
View all Sanyo MPR-1013R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
OPTIONAL COMPONENTS Attachment of recorder MTR-G04 WARNING Always disconnect the power supply plug before installing an automatic temperature recorder in order to prevent electric shock or injury. 1. Follow the instruction manual provided with the temperature recorder and attach the recorder to the fixture MPR-S7. 2. Open the cover for recorder attachment space by removing the screw. 3. Remove the cover by pushing the shaft on both side outward. See Fig. 1. 4. As shown in Fig. 2, attach the temperature recorder to the fixture with enclosed screws. shaft screw cover Fig. 1 MTR-G04 5. Remove two screws fixing the plate for air intake vent (far right side) and remove the plate. 6. Lead the sensor of the recorder in the chamber through the hole after taking out the thermal insulation from it as shown in Fig. 3. MPR-S7 Fig. 2 7. Fix the recorder sensor to the sensor fixture as shown in Fig. 4. Fig. 3 8. Connect the connector on recorder with that on the unit. See Fig. 5 9. After installing the bottom cut of the fixture on the shaft, secure the fixture by screws. 10. Return the thermal insulation and then attach the plate for air intake vent to the original place. sensor fixture Fig. 4 connector Fig. 5 14