Sanyo PDG-DWL2500 RS232C Expand

Sanyo PDG-DWL2500 - 2500 Lumens Manual

Get Sanyo PDG-DWL2500 - 2500 Lumens PDF manuals and user guides
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DWL2500 manual content summary:

  • Sanyo PDG-DWL2500 | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PDG-DWL2500 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 2
    PDG-DWL2500 Expand Serial Command Functional Specifications - CONTENTS - 1. Overview ...7 2. Serial Interface Specification 7 2.1 Transfer Specification Read Command Table 12 6.5 Screen Status Read Command Table 13 6.6 Lamp Status Read Command Table 13 6.7 Sound Status Read Command Table 13
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 3
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.4.9 CF_PROGV Command 19 8.4.10 CF_NZRED Command 19 8.4.11 CF_IMAGE Command 31 8.7.11 CF_SCREENASPECT Command 31 8.7.12 CF_COLBOARD Command 32 8.8 Lamp Command ...33 8.8.1 CF_LAMPH Command 33 8.8.2 CF_LAMPMODE Command 33 8.9 Sound
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 4
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.9.2 CF_MUTE Command 34 8.10 Setting Command 35 8.10.1 CF_LANG Command 35 8.10.2 CF_MENUPOSITION Command 35 8.10.3 CF_AUTOSETUPPCADJ Command 36 8.10.4 CF_INPUTSEARCH Command 36 8.10.5 CF_AUTOSETUP
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 5
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.1 Format ...46 9.2 Transfer Example 46 9.3 Operation Condition 46 9.4 Image Status Read Command 47 9.4.1 CR_BRIGHT Command 47 9.4.2 CR_CONT Command 47 9.4.3 CR_COLOR Command 47 9.4.4 CR_TINT Command 47 9.4.5
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 6
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.8.2 CR_ KYSTNMODE Command 57 9.8.3 CR_VSCALE Command 57 9.8.4 CR_VPOS Command 57 9.8.5 CR_HSCALE Command 57 9.8.6 CR_HPOS Command 58 9.8.7 CR_ CEIL Command 58 9.8.8 CR_ REAR Command 58 9.8.9 CR_
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 7
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.11.20 CR_CCAPTIONCOLOR Command 66 9.11.21 CR_RCODE Command 66 9.11.22 CR_SECURITY Command 66 9.11.23 CR_KEYDIS Command 66 9.11.24 CR_PJLOCKNOW Command 67 9.
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 8
    Expand Serial Command Functional Specifications 1. Overview 1.1 This Functional Specification defines communication functions for PDG-DWL2500. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely from PC by RS-232C. Therefore, the commands
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 9
    PDG-DWL2500 Expand Serial Command Functional Specifications 3. Notes for communication 1. Expand Serial Command is When it takes more than one second to receive carriage return (0X0D) after the projector receives the first data "C", it clears the information of buffer. 4. On command pipelining
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 10
    PDG-DWL2500 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Command Table Execute command CF_BRIGHT_%1[CR] CF_CONT_%1[CR] CF_COLOR_%1[CR] CF_TINT_%1[CR] CF_SHARP_%1[CR] CF_GAMMA_%1[CR] CF_WBAL-R_%1[CR] CF_WBAL-
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 11
    PDG-DWL2500 Expand Serial Command Functional Specifications 5.4 Lamp Command Table Execute command CF_LAMPH_%1[CR] CF_LAMPMODE_%1[CR] Item Reset Lamp use time Select Lamp Set color of Closed caption Select Remote Control Reception Code Disable RC/Projector keys (Only available to models with
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 12
    PDG-DWL2500 Expand Serial Command Functional Specifications CF_FILH_%1[CR] CF_FDEFAULT_%1[CR] Reset Filter used time Set the value to Factory Default 5.8 Other Command Table Execute command CF_KEYEMU_%1[CR] CF_MENU_%1[CR] CF_POWER_%1[CR] CF_FREEZE _%1[CR] CF_VMUTE _%1[CR] CF_PTIMER_%1[CR]
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 13
    PDG-DWL2500 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command CR_BRIGHT[CR] CR_CONT[CR] CR_COLOR[CR] CR_TINT[CR] CR_SHARP[CR] CR_GAMMA[CR] CR_WBAL-R[
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 14
    PDG-DWL2500 Expand Serial Command Functional Specifications Lamp replacement time Get lamp total running time Get corresponding lamp use time Get Lamp Mode status Get lamp lighting status Get projector total running time Get lamp of Closed caption Get selected Remote Control Code Get setting status
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 15
    PDG-DWL2500 Expand Serial Command Functional Specifications CR_FANMODE[CR] CR_FANCONTROL[CR] CR_FILH[CR] CR_FILREPL[CR] CR_FILTIMER[CR] Get selected Fan mode Get selected Fan Control Mode Get Filter used time Get the information for Filter replacement time Get time when Filter warning OSD is
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 16
    PDG-DWL2500 Expand Serial Command Functional Specifications 7. Error Code Table Error Code ? Details -When the received data cannot be decoded -Parameter determination error (digit number error, including invalid value, etc.) 101 When
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 17
    PDG-DWL2500 Expand Serial Command Functional Specifications 8. Functional Execution Command 8.1 Format 1. PC issues commands in format as below: Pattern1 N/A N/A C00: POWER ON C01: POWER OFF Note:) When the projector receives the other command in this above status, it returns error code to show
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 18
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Command "CF_BRIGHT_%1"[CR] setting value - 1 Details Set Color value of user control The value set by this command will not be saved to projector. Therefore, when turning into Standby status or
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 19
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1"[CR] "000~015 Directly select Sharpness setting value %1 "UP Current Sharpness setting value + 1 "DN Current Sharpness setting value - 1 Details Set Sharpness value of user control The
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 20
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1"[CR] "000" ------ Xlow %1 cancel Progressive scan The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 21
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command "CF_IMAGE_%1"[CR] user) "CUSTOM2" ----- Image2 (the value set and stored by a user) "CUSTOM3" ----- Image3 (the value set and stored by a user) "CUSTOM4" ----- Image4 (the value set and stored by a user
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 22
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 CF_FSYNC Command Command " Sync value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to original
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 23
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H-POS_%1"[CR] "0000~nnnn" --- Position value of PC signal The value set by this command will not be saved to projector. Therefore, when turning into Standby status or ALL is OFF, the value returns to
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 24
    PDG-DWL2500 Expand Serial Command Functional Specifications Details Response "MODE8" ------ Set Mode8 to Free status "MODE9" ------ Set Mode9 to Free status "MODE10" ---- Set Mode10 to Free status Delete the registered data in
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 25
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1"[CR operation as "INPUT" button of the projector and Remote Control. This command is available in normal Power ON status. Projector returns "101" by selecting Computer
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 26
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.6.2 CF_SOURCE Command Command "CF_SOURCE_%1"[CR] Input is Computer selected Input When Input specified by %1 is inappropriate for selected Input, the projector returns "101" and the command is not executed. This command is available
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 27
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.6.5 CF_INPUT3 Command Command "CF_INPUT3_%1_"[CR] %1 "HDMI also Source specified in %2 This command is available in normal Power ON status. Projector returns "101" by selecting Computer 2 while Monitor out is selected in Terminal menu
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 28
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.6.9 CF_SYSTEM Command Command "CF_SYSTEM_%1"[CR] "VGA1 Select VGA1 selected Input When SYstem specified by %1 is inappropriate for selected Input, the projector returns "101"[CR] and the command is not executed This command is
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 29
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command " image size on screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM UP" and
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 30
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command "CF_KEYSTONE_%1"[CR] "UP Correct Keystone into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Response Unacceptable "Error
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 31
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.7.6 CF_VPOS Command Command "CF_VPOS_%1"[CR] "015 15 "014 14 "002 2 "001 into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 32
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command "CF_HPOS_%1"[CR] "015 15 "014 14 "002 2 " into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 33
    PDG-DWL2500 Expand Serial Command Functional Specifications Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.7.12 CF_COLBOARD Command Command "CF_COLBOARD_%1"[CR] "OFF Select OFF "RED Select Red %1 "BLUE Select Blue "YELLOW Select
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 34
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command "CF_LAMPH_%1"[CR] %1 "RST" Details Reset Lamp use time counter. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.8.2
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 35
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command "CF_VOLUME_%1"[CR] "000 canceled just like RC operation. The value set by this command is stored in Projector. This command is available in normal Power ON status. Acceptable "000"[CR]
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 36
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command "CF_LANG_%1"[CR] "ENG Select English "DEU Select German "FRA Select French "ITA Select Italian "ESP Select Spanish "POR
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 37
    PDG-DWL2500 Expand Serial Command Functional Specifications to set both PC ADJ. and Input search to OFF. If projector receives Auto PC ADJ. OFF command while Input search is OFF, CR] %1 "ON Select ON "OFF Select OFF Details Setup 3D function. The status set by this command is stored in EEPROM
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 38
    PDG-DWL2500 Expand Serial Command Functional Specifications %1 Details Response "1 Select 1 "2 Select 2 Setup 3D Sync. The 10.11CF_BACKGND Command Command "CF_BACKGND_%1" [CR] "BLUE Select Blue Back "USER Select User %1 "BLACK Select Black Back "UP The same operation as pressing Up
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 39
    PDG-DWL2500 Expand Serial Command Functional Specifications Response The status set by this command is stored in EEPROM and the setting remains even after the power is turned to ALL OFF status. *When 1="USER LOCK continues.) Response Projector returns Error Code "101" by receiving USER in %2 when
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 40
    PDG-DWL2500 Expand Serial Command Functional Specifications %1 Details Response "NORMAL Select Normal mode "ENHANCED 000"[CR] Response "Error Code"[CR] Unacceptable When Input is Computer 2, the projector returns "101" and the command is not executed. 8.10.17 CF_STANDBYMODE Command Command
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 41
    PDG-DWL2500 Expand Serial Command Functional Specifications Response after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.19 CF_P-MANETIME
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 42
    PDG-DWL2500 Expand Serial Command Functional Specifications pressing Down key or Right key Details Select Code of Remote Control The status set by this command is stored in RC & Projector keys are valid (All are valid) %1 "RC RC keys are invalid "KEY Projector keys are lamp turns on. 41/72
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 43
    PDG-DWL2500 Expand Serial Command Functional Specifications Acceptable "000"[CR] Response hours %1 "4000 Set 4000 hours "OFF No warning display "UP The same operation as pressing Up key or Left key "DN The same operation as pressing Down key or Right key Details Set timer of Filter
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 44
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.10.30 CF_FDEFAULT Command Command "CF_FDEFAULT_%1"[CR] %1 "RST" Details Set the value to Factory Default This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 43/72
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 45
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Command " key. "AUTOPC Execute Auto PC adj. Details This command behave the same as corresponding RC/Projector keys Once Auto PC adj. is started with "AUTOPC" command, it does not stop
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 46
    PDG-DWL2500 Expand Serial Command Functional Specifications 8.11.4 CF_FREEZE Command Command "CF_FREEZE_%1"[CR] "ON Set Freeze to ON "OFF Set Freeze to OFF %1 "UP Switch setting (On → Off → On → ) "DN Switch setting (
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 47
    PDG-DWL2500 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format 1) PC issues commands in format as below: "CR_Command" [CR] Command: Character Line 2) When projector receives the appropriate command, it returns a character line as the required data "000 "%1 [CR] %1:
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 48
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT"[CR] Details Get Brightness value of user Command Command "CR_COLOR"[CR] Details Get Color value of user control Response Acceptable %a "000_%a"[CR] "000"~"063
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 49
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.4.6 CR_GAMMA Command Command "CR_GAMMA"[CR] Details Get Gamma value of user control Acceptable "000_%a"[CR] "DFLT Default is selected. "18 1.8 is selected. Response %a "20 2.0 is selected. "22 2.2 is selected. "24 2.4 is
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 50
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.4.11 CR_NZRED Command Command "CR_NZRED"[CR] Details Get setting status of Noise Reduction Acceptable "000_%1"[CR] "L1" -------- Noise Reduction for moving image Response %1 "L2" -------- Noise
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 51
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC"[CR] Details Get Fine Sync value Response Acceptable %a "000_%a"[CR] "0000"~"0031" Unacceptable "Error Code"[CR] 9.5.2
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 52
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.5.6 CR_PCSTORE Command Command "CR_PCSTORE"[CR] Details Get Free/Stored status of MODE1 - MODE10 for PC Adjust The data consists of 10 bytes and each byte
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 53
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS"[CR] Details Get currently selected signal Returns auto-detected signal in Auto mode Only available for Video
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 54
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT"[CR] Details Get selected INPUT No. Acceptable "000_%1"[CR] Response Request data "1"-"5" Unacceptable "Error code"[CR] 9.7.2 CR_SOURCE
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 55
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.7.6 CR_SRCINP4 Command Command "CR_SRCINP4" [CR] Details Get selected source of Input 4_Video Acceptable "000_%1"[CR] Response Request data "VIDEO Composite Video Input is selected Unacceptable "
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 56
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.7.8 CR_SYSTEM Command Command "CR_SYSTEM"[CR] selected "D 575P D-575p is selected "D 480P D-480p is selected When there is no signal, projector returns error code"101" [CR] Input is Y,Pb/Cb,Pr /Cr "1080i 1080i is selected
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 57
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.7.9 CR_SYSLIST Command Command "CR_SYSLIST"[CR] Details Get selectable System titles Acceptable "000_%1_%2_..._%x" [CR] - When Input is PC-Analog "XGA1 XGA1is selectable "1080I 1080i is selectable Projector does not return Auto, Mode
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 58
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN i s selected "TRUE True mode is selected When the screen is set to D.Zoom, projector returns the previous Response %a status (NORMAL ) "CUSTOM Custom mode is selected Input is Video
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 59
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.8.6 %1 "-32" ~ "032" Unacceptable "Error code"[CR] CR_HPOS Command Command "CR_HPOS"[CR] Details Get setting status of Horizontal Position Store Mode Response Acceptable %1 "000_%1"[CR] "-15" ~ "
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 60
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time Response %1 "1"
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 61
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command "CR_LAMPSTS"[CR] Details Get Lighting status of lamp Acceptable "000_%1"[CR] " **** " A number of * should be among 1-4. First character shows how many lamps are incorporated in projector. (1,2 or 4 )
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 62
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME"[CR] Details Get Volume value of user control Response Acceptable %a "000_%a"[CR] "000"~"063" Unacceptable "Error code"[CR] 9.10.2 CR_MUTE Command Command
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 63
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG Command Command "CR_LANG"[CR] Details Get selected language Acceptable "000_%a"[CR] "ENG Select English "DEU Select German "FRA
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 64
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.11.4 CR_ DSET Command Command "CR_3DSET"[CR] Details Get setting status of 3D function Acceptable "000_%a"[CR] Response %a "ON On is selected "OFF Off is selected Unacceptable "Error Code"[CR] 9.11.5 CR_3DSYNC Command Command
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 65
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.11.9 CR_BACKGND Command Command "CR_BACKGND" [CR] Details Get setting status of Screen for no signal Acceptable "000_%1" [CR] Response "BLUE Blue Back is selected %1 "USER User is selected "BLACK Black Back is selected
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 66
    PDG-DWL2500 Expand Serial Command Functional Specifications Details Response Get setting status of Terminal Acceptable "000_%1"[CR] %1 "COMPUTER Computer Input mode "MONITOR Monitor Out mode Unacceptable "?"[CR] 9.11.15 CR_STANDBYMODE Command Command "
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 67
    PDG-DWL2500 Expand Serial Command Functional Specifications "CR_RCODE"[CR] Details Get selected Remote Control Code Acceptable "000_%a"[CR] Projector keys (valid or invalid) Acceptable "000_%a"[CR] "NONE RC / Projector keys are valid Response %a "RC RC keys are invalid "KEY Projector
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 68
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.11.24 CR_PJLOCKNOW Command Command "CR_PJLOCKNOW" [ CR_FILH Command Command "CR_FILH"[CR] Details Get Filter used time Response Acceptable %1 "000_%1"[CR] "00000"~"99999 0 hour to 99999 hours Unacceptable "Error Code"[CR] 67/72
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 69
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.11.29 CR_FILREPL Command Command "CR_FILREPL"[CR] Details Get the information of Filter replacement time Acceptable "000_%1"[CR] Response %1 "1Y Over filter replacement time "1N Within filter replacement time Unacceptable "Error
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 70
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command "CR_STATUS"(CR) Details Get status of Projector "21"= Cooling down due to Lamp failure "81"= Stand by after Cooling down due to Lamp failure Unacceptable "Error Code"[CR]
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 71
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.12.5 CR_ PTIMER Command Command "CR_ PTIMER"[CR] 12.6 CR_TEMPWARN Command Command "CR_TEMPWARN"[CR] Details Get the temperature inside a projector and its condition if it is abnormal temperature or close to abnormal temperature
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 72
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.12.7 CR_TEMP Command Command "CR_TEMP"[CR] Details Get current temperature inside a projector such as "_00.0E". Some of the projectors get abnormal temperature because of heat of Lamp ballast in Standby mode or Powering ON. Therefore
  • Sanyo PDG-DWL2500 | RS232C Expand - Page 73
    PDG-DWL2500 Expand Serial Command Functional Specifications 9.12.8 CR_TEMPFAIL Command Command "CR_TEMPFAIL"[CR] Details Get the temperature inside a projector When the projector is reset, "□000S" is set, and every time abnormal temperature occurs, it renews the data and returns it. In short, it
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PDG-DWL2500
Ver. 1.00
SANYO Electric Co., Ltd
DS Company
Projector Division