Sanyo PDG-DWL2500 RS232C Expand - Page 71
CR_ PTIMER Command, 12.6 CR_TEMPWARN Command
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
PDG-DWL2500 Expand Serial Command Functional Specifications 9.12.5 CR_ PTIMER Command Command "CR_ PTIMER"[CR] Details Get setting status of Presentation timer Acceptable "000_%a"[CR] "ON Presentation timer is active Response %a "STOP Presentation timer is pause "OFF Presentation timer is inactive Unacceptable "Error code"[CR] 9.12.6 CR_TEMPWARN Command Command "CR_TEMPWARN"[CR] Details Get the temperature inside a projector and its condition if it is abnormal temperature or close to abnormal temperature If there are several sensors installed, it is possible to get information from all the sensors at once. Acceptable "000_%a_%b_%c"[CR] %a Sensor 1 status %b Sensor 2 status %c Sensor 3 status "W" ---- Approach or reach abnormal temperature (dangerous temperature) "S" ---- Far from abnormal temperature (safe temperature) "N" ---- Sensor detects no abnormal temperature Response %a %b %c [Example] "S_W_S"[CR] means Sensor 1 detects safe temperature, Sensor 2 detects abnormal temperature and Sensor 3 detects safe temperature Note) When the temperature difference between Sensor 1 and 3 reaches specific value, some of the models detect it as Abnormal temperature. In this case, the 3rd data shows if the temperature difference between Sensor 1 and 3 is dangerous state or not. The 3rd data means temperature abnormality due to Sensor 3 When abnormal temperature is not detected by sensor, "N" (No connection with temperature abnormality) is returned. Unacceptable "Error code"[CR] 70/72