Sanyo PDG-DWL2500 RS232C Expand - Page 32

PDG-DWL2500 Expand Serial Command Functional Specifications 8.7.8 CF_HPOS Command Command "CF_HPOS_%1"[CR] "015 15 "014 14 "002 2 "001 1 "000 0 %1 "-01 1 "-02 2 Details Response "-14 14 "-15 15 "UP Horizontal Position setting value + 1 "DN Horizontal Position setting value - 1 Set Horizontal Position This command is available in normal Power ON status. Note1) Screen mode is changed into Custom by receiving this command. Note2) When there is no Input, projector returns 101 and the command does not execute. Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.7.9 CF_CEIL Command Command "CF_CEIL_%1"[CR] %1 "ON Set Ceiling to ON "OFF Set Ceiling to OFF Details Set/Cancel Ceiling setting. The value set by this command is stored in EEPROM and its setting is effective even after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.7.10 CF_REAR Command Command "CF_REAR_%1"[CR] %1 "ON Set Rear to ON "OFF Set Rear to OFF Details Set/Cancel Rear setting. When Rear is ON, image is left/right reversed. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.7.11 CF_SCREENASPECT Command Command "CF_SCREENASPECT_%1"[CR] "43MODE" %1 "169MODE" "1610MODE" Select 4 3 mode Select 16 9 mode Select 16 10 mode Details Set Screen aspect mode. This command is available in normal Power ON status. 31/72