Sanyo PDG-DXL100 RS232C Basic

Sanyo PDG-DXL100 - XGA DLP Projector Manual

Get Sanyo PDG-DXL100 - XGA DLP Projector PDF manuals and user guides
UPC - 086483074868
View all Sanyo PDG-DXL100 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DXL100 manual content summary:

  • Sanyo PDG-DXL100 | RS232C Basic - Page 1
    BASIC SERIAL COMMAND SPECIFICATIONS PDG-DXL100 Ver. 1.01 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PDG-DXL100 | RS232C Basic - Page 2
    PDG-DXL100 Basic Serial Command Specifications CONTENTS 1 Overview ...4 2 Serial Interface Specification 4 2.1 Transfer Specification Command 11 6.16 Aspect Ratio 4:3 Command 11 6.17 Aspect Ratio 16:9 Command 11 6. zoom + Command 13 6.29 D.zoom - Command 13 6.30 Video Command 13 6.31 S-Video
  • Sanyo PDG-DXL100 | RS232C Basic - Page 3
    PDG-DXL100 Basic Serial Command Specifications 6.32 YPbPr 1 Command 14 6.33 POINTER RIGHT Command 14 6.34 POINTER 7.2 Transfer Example 16 7.3 OSD ...16 7.4 Status Read Command 17 7.5 Input Mode Read Command 18 7.6 Lamp Time Read Command 18 7.7 Setting Read Command 18 7.8 Temp Read Command 19
  • Sanyo PDG-DXL100 | RS232C Basic - Page 4
    1.1. This specification defines projector control commands for the PDG-DXL100 series. 1.2. The projector control commands are designed to remote-control a projector through RS-232C and LAN from a computer. 1.3. Browser menus and commands for manufacture setting up are shown with red fonts /shaded
  • Sanyo PDG-DXL100 | RS232C Basic - Page 5
    PDG-DXL100 Basic Serial Command Specifications 3 Notes for Communication 3.1. The communication speed can be changed in menu. It starts to decode when the projector commands. 3.4.1. [VOLUME +/-] [ZOOM UP/DOWN] [FOCUS UP/ projector receives the commands for internal initialization or Iighting the lamps
  • Sanyo PDG-DXL100 | RS232C Basic - Page 6
    PDG-DXL100 Basic Serial Command Specifications 4 Functional Execution Command Table Command C00 C01 C04 Item POWER ON POWER OFF (Immediate POWER OFF) HDMI C05 Computer 1 C06 Computer 2 C09 Volume + C0A Volume -
  • Sanyo PDG-DXL100 | RS232C Basic - Page 7
    PDG-DXL100 Basic Serial Command Specifications 6 Functional Execution Command 6.1 Format ① PC issues a command in the format below: "C" Command [CR] Command: 2 characters (Refer to the Functional Execution Command Table.) ① The projector as the one for the Remote Control Reception, as indicated below
  • Sanyo PDG-DXL100 | RS232C Basic - Page 8
    PDG-DXL100 Basic Serial Command Specifications 6.4 Operation Requirements The Functional Execution Commands are limited, when the projector is in the status below. (The Status Read Commands are available in following status.) Projector Status Available Functional Execution Commands In Standby
  • Sanyo PDG-DXL100 | RS232C Basic - Page 9
    PDG-DXL100 Basic Serial Command Specifications 6.5 POWER ON Command COMMAND "C00" [CR] Detail Set Power On. (Same as the "Power On" key on the projector body / remote controller.) No operation is started when the projector has been turned on already. "Count Down" is terminated by receiving this
  • Sanyo PDG-DXL100 | RS232C Basic - Page 10
    PDG-DXL100 Basic Serial Command Specifications 6.11 Volume - Command COMMAND "C0A" [CR] Detail This command turns down the Volume. This command works the same as "VOLUME " button of the projector and remote control. The projector shows the OSD "Volume" at receiving the command. Response
  • Sanyo PDG-DXL100 | RS232C Basic - Page 11
    PDG-DXL100 Basic Serial Command Specifications 6.15 Video Mute OFF Command COMMAND "C0E" [CR] Detail This command sets AV Mute OFF. It releases the "Video Mute", but does not release "Sound Mute". It works immediately after the command is transmitted. The projector shows the OSD "AV-Mute" at
  • Sanyo PDG-DXL100 | RS232C Basic - Page 12
    PDG-DXL100 Basic Serial Command Specifications 6.20 Image mode sRGB Command COMMAND "C13" [CR] Detail Set Image mode to sRGB. This command changes Image mode immediately into sRGB. The projector shows the OSD "sRGB" on the screen at receiving the command. Response Acceptable [ACK] [CR]
  • Sanyo PDG-DXL100 | RS232C Basic - Page 13
    PDG-DXL100 Basic Serial Command Specifications 6.26 Scart Command COMMAND "C26" [CR] Detail Select "Scart" The projector shows the OSD "Scart" at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.27 IMAGE Toggle Command COMMAND "C27" [CR] Detail Switch Images
  • Sanyo PDG-DXL100 | RS232C Basic - Page 14
    PDG-DXL100 Basic Serial Command Specifications 6.32 YPbPr 1 Command COMMAND "C35" [CR] Detail Select "YPbPr 1" The projector shows the OSD " The behavior is the same as the "SELECT" key on the projector and the remote control. The projector does not show any OSD when it accepts this command and
  • Sanyo PDG-DXL100 | RS232C Basic - Page 15
    PDG-DXL100 Basic Serial Command Specifications 6.38 FREEZE ON Command COMMAND "C43" [CR] Detail Freeze the projecting image. The behavior is the same as "FREEZE" button of the remote control except the command only freezes the image and does not cancel it. The projector shows the OSD "Freeze" at
  • Sanyo PDG-DXL100 | RS232C Basic - Page 16
    PDG-DXL100 Basic Serial Command Specifications 7 Status Read Command 7.1 Format 1) PC issues a command in the format below: "CR" Command [CR] Command: Single character (Refer to Status Read Command Table) 2) When a projector receives the appropriate command, it returns the required information as a
  • Sanyo PDG-DXL100 | RS232C Basic - Page 17
    PDG-DXL100 Basic Serial Command Specifications 7.4 Status Read Command COMMAND "CR0" [CR] Detail Get the projector status Acceptable "%1" [CR] Response "00" = Cooling Down status. This status automatically moves to Standby when the lamp is turned off and the fan spin finishes after about 90
  • Sanyo PDG-DXL100 | RS232C Basic - Page 18
    PDG-DXL100 Basic Serial Command Specifications Even if the temperature comes down during this process, the given Cooling Down process is executed and it moves to Standby mode. "21" [CR] Status: Cooling Down in process after turned off due to lamp failure When a projector is turned off because of
  • Sanyo PDG-DXL100 | RS232C Basic - Page 19
    PDG-DXL100 Basic Serial Command Specifications 7.8 Temp Read Command COMMAND "CR6" [CR] Detail Get the temperature information inside projector With more than one temperature sensors installed in the projector, it is possible to get all temperatures at once. Acceptable "%1" [CR] %1 =
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
BASIC SERIAL COMMAND SPECIFICATIONS
PDG-DXL100
Ver. 1.01
SANYO Electric Co., Ltd
DS Company
Projector Division