Sanyo PDG-DXL100 RS232C Basic - Page 15
FREEZE ON Command, FREEZE OFF Command, AUTO ADJ. Command, KEYSTONE + Command, KEYSTONE - Command
UPC - 086483074868
View all Sanyo PDG-DXL100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
PDG-DXL100 Basic Serial Command Specifications 6.38 FREEZE ON Command COMMAND "C43" [CR] Detail Freeze the projecting image. The behavior is the same as "FREEZE" button of the remote control except the command only freezes the image and does not cancel it. The projector shows the OSD "Freeze" at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.39 FREEZE OFF Command COMMAND "C44" [CR] Detail Cancel Freeze function The behavior is the same as "FREEZE" button of the remote control except the command only cancels the freeze and does not freezes the image. The projector shows the OSD "Freeze" at receiving command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.40 AUTO ADJ. Command COMMAND "C89" [CR] Detail AUTO ADJ. Command The behavior is the same as the key "AUTO PC" button of the remote control. The projector does not show any OSD at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.41 KEYSTONE + Command COMMAND "C8E" [CR] Detail Correct keystone distortion by resizing upper part of image. The behavior is the same as the "Keystone +" button of the remote control A scale OSD is shown by adjusting Keystone and the scale reflects adjusting value Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.42 KEYSTONE - Command COMMAND "C8F" [CR] Detail Correct keystone distortion by resizing lower part of image. The behavior is the same as the "Keystone -" button of the remote control A scale OSD is shown by adjusting Keystone and the scale reflects adjusting value Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 15/19