Sanyo PDG-DXL100 RS232C Basic - Page 14
YPbPr 1 Command, POINTER RIGHT Command, POINTER LEFT Command, POINTER UP Command, POINTER DOWN
UPC - 086483074868
View all Sanyo PDG-DXL100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
PDG-DXL100 Basic Serial Command Specifications 6.32 YPbPr 1 Command COMMAND "C35" [CR] Detail Select "YPbPr 1" The projector shows the OSD "YPbPr 1" at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.33 POINTER RIGHT Command COMMAND "C3A" [CR] Detail Move Pointer of OSD Menu to right. The behavior is the same as "►" button of the projector and the remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.34 POINTER LEFT Command COMMAND "C3B" [CR] Detail Move Pointer of OSD Menu to left. The behavior is the same as "◄" button of the projector and the remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.35 POINTER UP Command COMMAND "C3C" [CR] Detail Move up Pointer of OSD Menu. The behavior is the same as "▲" button of the projector and remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.36 POINTER DOWN Command COMMAND "C3D" [CR] Detail Move down Pointer of OSD Menu. The behavior is the same as the "▼"key on the projector and the remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.37 ENTER Command COMMAND "C3F" [CR] Detail The behavior is the same as the "SELECT" key on the projector and the remote control. The projector does not show any OSD when it accepts this command and there is no OSD shown. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 14/19