Sanyo PDG-DXL100 RS232C Basic - Page 18

PDG-DXL100 Basic Serial Command Specifications Even if the temperature comes down during this process, the given Cooling Down process is executed and it moves to Standby mode. "21" [CR] Status: Cooling Down in process after turned off due to lamp failure When a projector is turned off because of lamp failure, it automatically starts Cooling Down operation, in which the projector returns "21" [CR]. 7.5 Input Mode Read Command COMMAND "CR1" [CR] Detail Get currently selected Input Acceptable "%1" [CR] Response "1" = Selected. HDMI "2" = Selected. Computer 1 "3" = Selected. YPbPr 1 %1 "4" = Selected. Scart "5" = Selected. Computer 2 "6" = Selected. YPbPr 2 "7" = Selected. Video "8" = Selected. S-video Unacceptable "?" [CR] 7.6 Lamp Time Read Command COMMAND "CR3" [CR] Detail Get total lamp running hours Acceptable "%1" [CR] Response %1, %2 Each lamp data follows in sequence with one space between each of them. %1 = lamp No.1 e.g.; "00410" [CR Lamp No.1 = 410 Hours Unacceptable "?" [CR] 7.7 Setting Read Command COMMAND "CR4" [CR] Detail Get screen setting status of Ceiling/Rear. Acceptable "%1" [CR] Response "11" [CR] = Normal Screen Setting(Status: Desktop Front) "10" [CR] = Picture is top/bottom reversed %1 (Status: Ceiling Rear) "01" [CR] = Picture is left/right reversed (Status: Desktop Rear) "00" [CR] = Picture is top/bottom and left/right reversed (Status: Ceiling Front) Unacceptable "?" [CR] 18 / 19