Sanyo PLC-ET30L RS232C Basic - Page 10

PLC_ET30L Basic Serial Command Functional Specifications 6.5 POWER ON Command Command "C00" [CR] Detail Power ON When already Power is ON, no operation is started. When sending this command during Countdown in process, Countdown is terminated. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.6 POWER OFF Command (Quick POWER OFF) Command "C01" [CR] Detail Power OFF (Standby) This command executes Quick Power OFF operation without displaying "Power OFF?" message, which is displayed when Power is turned OFF with button of the projector or remote control. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.7 POWER OFF Command Command "C02" [CR] Detail Power OFF (Standby) This command works the same way as when Power is OFF with STAND-BY button of the remote control. (When the command is sent once, "Power OFF?" message is displayed. If this command is sent again while "Power OFF?" message is displayed, Power OFF operation is executed.) When sending this command during Countdown in process, Countdown is terminated. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.8 INPUT 1 Command Command "C05" [CR] Detail Select Input 1. This command works differently from the command by "Input 1" key of the remote control. When Input 1 has been already selected, this command does not execute the source switching; just for switching to Input 1. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.9 INPUT 2 Command Command "C06" [CR] Detail Select Input 2. This command works differently from the command by "Input 2" key of the remote control. When Input 2 has been selected, this command does not execute the source switching; just for switching to Input 2. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 10/24