Sanyo PLC-ET30L RS232C Basic - Page 8
Functional Execution Command, 1 Format, 2 When the command pipelining is needed, 3 Transfer Example
UPC - 086483069925
View all Sanyo PLC-ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PLC_ET30L Basic Serial Command Functional Specifications 6. Functional Execution Command 6.1 Format PC issues a command in the following format: "C" Command [CR] Command: two characters (See Functional Execution Command Table) Projector decodes the received data and returns the result when getting ready to receive the next command. [ACK] [CR] (0x06, 0x0D) When received Functional Execution Commands. When received data cannot be decoded, "?" [CR] is returned. 6.2 When the command pipelining is needed In the case of the function requiring command pipelining, such as "Volume +/-" and "Zoom +/-", operation should follow the same way as in remote control: 1) Sending-side system issues commands every 100 ms after receiving the return value. 2) When receiving an applicable command, the function is executed for 120 ms from the moment. 3) When receiving the same command in sequence within 120 ms, the function is executed for another 120 ms from the moment of the second command reception. 4) When any other command is not received after 120 ms, the execution of pipelining is stopped. 5) When Projector receives another command within 120 ms, the execution of pipelining is stopped. 6.3 Transfer Example Change Projector mode to Video with Basic Command. Command PC Projector "C" "0" "7" CR Projector PC ACK CR Processing (A few ms 5 s 8/24