Sanyo PLC-ET30L RS232C Basic - Page 4
Overview, Serial Interface Specification, 1. Transfer Specification, 2. Connection, Projector, COM 1
UPC - 086483069925
View all Sanyo PLC-ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
PLC_ET30L Basic Serial Command Functional Specifications 1. Overview These specifications define projector control commands for PLC-ET30L. The projector control commands are used to control a projector through RS-232C from a computer. 2. Serial Interface Specification 2.1. Transfer Specification Item Specification Synchronous system Asynchronous Transmission Speed 9600 / 19200 Data Length 8 bits Parity None Stop Bit 1 Flow Control None Transmission speed: initial setting value is 19200. Transmission speed can be changed in service mode. 2.2. Connection Dedicated serial cable must be used for the connection between computer and projector. PC COM 1 Projector Control Port D-Sub 9 Pin Mini 8 Pin 4/24
PLC_ET30L Basic Serial Command Functional Specifications
4/24
1. Overview
�
These specifications define projector control commands for PLC-ET30L.
�
The projector control commands are used to control a projector through RS-232C from a computer.
2. Serial Interface Specification
2.1. Transfer Specification
Item
Specification
Synchronous system
Asynchronous
Transmission Speed
9600 / 19200
Data Length
8 bits
Parity
None
Stop Bit
1
Flow Control
None
�
Transmission speed: initial setting value is 19200.
�
Transmission speed can be changed in service mode.
2.2. Connection
Dedicated serial cable must be used for the connection between computer and projector.
PC
Projector
COM 1
Control Port
�
D-Sub 9 Pin
�
�
Mini 8 Pin
�