Sanyo PLC-HF10000L RS232 Expand - Page 60
CF_SHUTEFFECT Command, 9.62 CF_SHUTRELEASE Command, 9.63 CF_DELAYCTRL Command, 9.64
View all Sanyo PLC-HF10000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
PLC-HF10000L Expand Serial Command Functional Specifications 8.9.61 CF_SHUTEFFECT Command Command "CF_SHUTEFFECT_%1" [CR] "OFF" --------Disable fade in and out function of Shutter %1 "L1" --------- Set fade in and out function of Shutter to L1 "L2" --------- Set fade in and out function of Shutter to L2 Details Set Effect function of Shutter. (Valid only when in the normal Power ON status) When L1 is selected, projected image quickly fade in and out. When L2 is selected, projected image slowly fade in and out. The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.62 CF_SHUTRELEASE Command Command "CF_SHUTRELEASE_%1" [CR] %1 "ANY Enable to release Shutter with any key "SHUTTER Enable to release Shutter with only "SHUTTER" key Details Set Release key of Shutter. (Valid only when in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.63 CF_DELAYCTRL Command Command "CF_DELAYCTRL_%1" [CR] "OFF"---------- Set Video delay control to OFF %1 "LOW"---------- Set Video delay control to LOW "MID Set Video delay control to MID "HIGH"---------- Set Video delay control to HIGH Details Select the mode of Video delay control (Valid only when in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.64 CF_CCAPTIONDISP Command Command "CF_CCAPTIONDISP_%1" [CR] "OFF Select Off "CC1 Select CC1 %1 "CC2 Select CC2 "CC3 Select CC3 "CC4 Select CC4 Details Select channel of Closed caption. The status set with this command is stored in EEPROM and its setting is effective even after ALL is OFF. This command is available in normal Power ON status. Note) Closed caption is available under conditions below; Entered signal is appropriate (NTSC signal from Video or S-video) or System is fixed to NTSC. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 60/105