Sanyo PLC-HP7000L RS232C Basic

Sanyo PLC-HP7000L Manual

Get Sanyo PLC-HP7000L PDF manuals and user guides View all Sanyo PLC-HP7000L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-HP7000L manual content summary:

  • Sanyo PLC-HP7000L | RS232C Basic - Page 1
    BASIC SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-HP7000L Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-HP7000L | RS232C Basic - Page 2
    Contents 1. Overview...5 2. Serial Interface Specification 5 2.1. Transfer Specification 5 2.2. Connection ...5 3. Notes for Communication 6 following status of projector, Available Functional Execution Commands are limited...11 6.4.2 Functional Execution Commands are invalid when projector is in
  • Sanyo PLC-HP7000L | RS232C Basic - Page 3
    PLC-HP7000L Basic Serial Command Functional Specifications 6.27 POWER MANAGEMENT READY1 Command 15 6.28 51 INPUT 1 DVI (AV HDCP) Command 19 6.52 LENS SHIFT UP Command 20 6.53 LENS SHIFT DOWN Command 20 6.54 LENS SHIFT LEFT Command 20 6.55 LENS SHIFT RIGHT Command 20 6.56 AUTO PC ADJ. Command
  • Sanyo PLC-HP7000L | RS232C Basic - Page 4
    PLC-HP7000L Basic Serial Command Functional Specifications 7.4 Status Read Command 23 7.5 Input Mode Read Command 26 7.6 Lamp Time Read Command 26 7.7 Setting Read Command 26 7.8 Temp Read Command 27 7.9 Lamp Mode Read Command 27 4/27
  • Sanyo PLC-HP7000L | RS232C Basic - Page 5
    1. Overview ・ These specifications define projector control commands for PLC-HP7000L. ・ The projector control commands are used to control a projector through RS-232C from a computer. 2. Serial Interface Specification 2.1. Transfer Specification Item Specification Synchronous system Asynchronous
  • Sanyo PLC-HP7000L | RS232C Basic - Page 6
    PLC-HP7000L Basic Serial Command Functional Specifications 3. Notes for Communication ・ The projector command is defined as one command per line receiving return value. 1) Commands "ZOOM UP/DOWN", "FOCUS UP/DOWN" and "LENS-SHIFT UP/DOWN/RIGHT" --> 100ms 2) Other commands --> 500ms ・ For the
  • Sanyo PLC-HP7000L | RS232C Basic - Page 7
    PLC-HP7000L Basic Serial Command Functional Specifications 4. Functional Execution Command Table Command C00 C01 C02 C03 C04 C05 C06 C07 C08 C09 C0A C0B C0C C0D C0E C0F C10 C11 C12 C13
  • Sanyo PLC-HP7000L | RS232C Basic - Page 8
    PLC-HP7000L Basic Serial Command Functional Specifications Command C40 C41 C42 C43 C44 C45 1 ANALOG RGB INPUT 1 SCART INPUT 1 DVI (PC Digital) INPUT 1 DVI (AV HDCP Lens Shift Up Lens Shift Down Lens Shift Left Lens Shift Right Command C80 C81 C82 C83 C84 C85 C86 C87 C88 C89 C8A C8B C8C C8D C8E
  • Sanyo PLC-HP7000L | RS232C Basic - Page 9
    PLC-HP7000L Basic Serial Command Functional Specifications 5. Status Read Command Table Command CR0 Item STATUS READ CR1 INPUT MODE READ CR2 --- CR3 CR4 LAMP TIME READ SETTING READ CR5 --- CR6 TEMP READ
  • Sanyo PLC-HP7000L | RS232C Basic - Page 10
    PLC-HP7000L Basic Serial Command Functional Specifications 6. Functional Execution Command 6.1 Format ・ PC issues a command in the following format: "C" Command [CR] Command: two characters (See Functional Execution Command Table) ・ Projector decodes the received data and returns the result when
  • Sanyo PLC-HP7000L | RS232C Basic - Page 11
    PLC-HP7000L Basic Serial Command Functional Specifications 6.4 Operation Requirements 6.4.1 In the following status of projector, Available Functional Execution Commands are limited. Projector : FOCUS + C5D: LENS SHIFT UP C5E: LENS SHIFT DOWN C5F:LENS SHIFT LEFT C60:LENS SHIFT RIGHT Cooling Down
  • Sanyo PLC-HP7000L | RS232C Basic - Page 12
    PLC-HP7000L Basic Serial Command Functional Specifications 6.5 POWER ON Command Command "C00" [CR] Detail ) This command works the same way as when Power is OFF with ON/STAND-BY button of the projector and remote control. (When the command is sent once, "Power OFF?" message is displayed. If this
  • Sanyo PLC-HP7000L | RS232C Basic - Page 13
    PLC-HP7000L Basic Serial Command Functional Specifications 6.10 INPUT 3 Command Command "C07" [CR] Detail this command does not execute the source switching; just for switching to Input 3. Although projector returns "OK", Input search is not executed with this command while Input button is set
  • Sanyo PLC-HP7000L | RS232C Basic - Page 14
    PLC-HP7000L Basic Serial Command Functional Specifications 6.16 MENU ON Command Command "C1C" [CR] Detail Display On VIDEO Command Command "C23" [CR] Detail Select Video input in Input 2. Although projector returns "OK", Input search is not executed with this command while Input button is set
  • Sanyo PLC-HP7000L | RS232C Basic - Page 15
    PLC-HP7000L Basic Serial Command Functional Specifications 6.22 INPUT 2 Y,Pb/Cb,Pr/Cr Command Command "C24" [CR] Detail Select Y,Pb/Cb,Pr/Cr input in Input 2. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response
  • Sanyo PLC-HP7000L | RS232C Basic - Page 16
    PLC-HP7000L Basic Serial Command Functional Specifications 6.28 POWER MANAGEMENT CANCEL Command Command "C2B" 3 VIDEO Command Command "C33" [CR] Detail Select Video input in Input 3. Although projector returns "OK", Input search is not executed with this command while Input button is set to
  • Sanyo PLC-HP7000L | RS232C Basic - Page 17
    PLC-HP7000L Basic Serial Command Functional Specifications 6.34 INPUT 3 S-VIDEO Command Command "C34" [CR] Detail Select S-Video input in Input 3. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [
  • Sanyo PLC-HP7000L | RS232C Basic - Page 18
    PLC-HP7000L Basic Serial Command Functional Specifications 6.40 ENTER Command Command "C3F" [CR] Detail This command works the same way as "SELECT" button of the projector Adjust on-screen focus by making focal length longer. (The lens moves backward) This command works the same way as "FOCUS
  • Sanyo PLC-HP7000L | RS232C Basic - Page 19
    PLC-HP7000L Basic Serial Command Functional Specifications 6.46 FOCUS - Command Command "C4A" [CR] Detail Adjust on-screen focus by making focal length shorter. (The lens Detail Select DVI (PC Digital) input in Input 1. Although projector returns "OK", Input search is not executed with this
  • Sanyo PLC-HP7000L | RS232C Basic - Page 20
    PLC-HP7000L Basic Serial Command Functional Specifications Unacceptable "?" [CR] 6.52 LENS SHIFT UP Command Command "C5D" [CR] Detail Move projection area upward. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.53 LENS SHIFT DOWN Command Command "C5E" [CR] Detail Move projection
  • Sanyo PLC-HP7000L | RS232C Basic - Page 21
    PLC-HP7000L Basic Serial Command Functional Specifications 6.58 PRESENTATION TIMER (Exit) Command Command "C8B" [CR] Detail Exit P-Timer function. This command works the same way as pressing and hold "P-TIMER" button of
  • Sanyo PLC-HP7000L | RS232C Basic - Page 22
    PLC-HP7000L Basic Serial Command Functional Specifications 7 Status Read Command 7.1 Format ・ PC issues a command in the following format. "CR" Command [CR] Command: one character (See Status Read Command Table) ・ When projector receives an appropriate command, it returns the required data in string
  • Sanyo PLC-HP7000L | RS232C Basic - Page 23
    PLC-HP7000L Basic Serial Command Functional Specifications 7.4 Status Read Command Command "CR0" [CR] Detail Get the projector's operating status Acceptable "%1" [CR] "00" = Power ON "80" = Standby "40" = Countdown in process "20" = Cooling Down in process "10" = Power Failure "28" =
  • Sanyo PLC-HP7000L | RS232C Basic - Page 24
    PLC-HP7000L Basic Serial Command Functional Specifications ・ "10" [CR] Status: Power Failure When the power supply voltage inside the projector reaches abnormal status, the projector is automatically turned off. ※ Abnormal power supply voltage includes; - Filter abnormal status - Shutter abnormal
  • Sanyo PLC-HP7000L | RS232C Basic - Page 25
    PLC-HP7000L Basic Serial Command Functional Specifications ・ "04" [CR] Status: Power Save This indicates it moves to Power-Save status by Power Management function as set in the Setting menu. ・ "21" [CR] Status: Cooling Down in process after OFF due to Lamp Failure When the projector is turned off
  • Sanyo PLC-HP7000L | RS232C Basic - Page 26
    PLC-HP7000L Basic Serial Command Functional Specifications 7.5 Input Mode Read Command Command "CR1" [CR] Detail Get currently selected Input No. Acceptable "%1" [CR] "1" = Input 1 is selected. Response %1 "2" = Input 2 is selected. "3" = Input 3 is selected. "4" =
  • Sanyo PLC-HP7000L | RS232C Basic - Page 27
    PLC-HP7000L Basic Serial Command Functional Specifications 7.8 Temp Read Command Command "CR6" [CR] Detail Get the information of temperature inside a projector to hardware problems, it %3 starts with "E" like"E00.0" [CR]. With several built-in temperature sensors, the projector returns the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
BASIC SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-HP7000L
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Division