Sanyo PLC-HP7000L RS232C Basic - Page 19

PLC-HP7000L Basic Serial Command Functional Specifications 6.46 FOCUS - Command Command "C4A" [CR] Detail Adjust on-screen focus by making focal length shorter. (The lens moves forward) This command works the same way as "FOCUS ▼" button of the remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.47 INPUT 1 HDMI Command Command "C4F" [CR] Detail Select HDMI input in Input 1. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.48 INPUT 1 ANALOG RGB Command Command "C50" [CR] Detail Select Analog RGB input in Input 1. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.49 INPUT 1 SCART Command Command "C51" [CR] Detail Select SCART input in Input 1. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.50 INPUT 1 DVI (PC DIGITAL) Command Command "C52" [CR] Detail Select DVI (PC Digital) input in Input 1. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.51 INPUT 1 DVI (AV HDCP) Command Command "C53" [CR] Detail Select DVI (AV HDCP) input of Input 1. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response Acceptable [ACK] [CR] 19/27