Sanyo PLC-XF47 Owners Manual
Sanyo PLC-XF47 - XGA LCD Projector Manual
 |
UPC - 086483068959
View all Sanyo PLC-XF47 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-XF47 manual content summary:
- Sanyo PLC-XF47 | Owners Manual - Page 1
Multimedia Projector MODEL PLC-XF47 PLC-XF47K Owner's Manual ✽ Projection lens is optional. - Sanyo PLC-XF47 | Owners Manual - Page 2
for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Functionally Rich This projector has many useful functions such as lens shifting, ceiling and rear projection - Sanyo PLC-XF47 | Owners Manual - Page 3
and Care 55 Air Filter Care and Cleaning 55 Resetting the Filter Counter 55 Lamp Management 56 Lamp Replacement 57 Resetting the Lamp Counter 58 Cleaning the Projection Lens 60 Cleaning the Projector Cabinet 60 Warning Indicators 61 Appendix 62 Troubleshooting 62 Menu Tree - Sanyo PLC-XF47 | Owners Manual - Page 4
the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING - Sanyo PLC-XF47 | Owners Manual - Page 5
has been dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same - Sanyo PLC-XF47 | Owners Manual - Page 6
operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. -Do not put any flammable object or spray can near the - Sanyo PLC-XF47 | Owners Manual - Page 7
reaches a time set in the timer setting, a Filter warning icon (Fig. 1) appears on the screen. Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. Positioning - Sanyo PLC-XF47 | Owners Manual - Page 8
Safety Instructions Moving the Projector For safety, be sure to hold Carrying Handles on both sides by 2 or more people when moving a projector. Moving it improperly may result in damage of cabinet or person's injury. Replace lens cap and retract feet to prevent damage to lens and cabinet. 1 Pull - Sanyo PLC-XF47 | Owners Manual - Page 9
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the - Sanyo PLC-XF47 | Owners Manual - Page 10
) Back !1 !2 CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. !0 Bottom !5 !6 !4 !3 !5 !0 Exhaust Vent !1 Infrared Remote Receiver (Rear) !2 Lamp Cover !3 Indicator (Front) !4 Air Intake Vent !5 Adjustable Feet !6 Air Filter !5 !5 10 - Sanyo PLC-XF47 | Owners Manual - Page 11
r USB CONNECTOR (Series B) Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of can be also connected. (Refer to p.21) y D-sub 15-PIN INPUT TERMINAL Connect computer output (Analog D-sub 15-pin type) to this terminal. (Refer to p.20) - Sanyo PLC-XF47 | Owners Manual - Page 12
adjusts the computer image to its optimum setting. (p.27) t ON/STAND-BY button Turn the projector on or off. (p.24) y FOCUS buttons Adjust the focus. (p.27) 12 u LENS SHIFT button Select the LENS SHIFT function. (p.27) i INPUT 1/2 button Select an input source either INPUT 1 or INPUT 2. (pp.30 - Sanyo PLC-XF47 | Owners Manual - Page 13
(pp.51, 68-69) e WARNING TEMP. indicator This indicator flashes red when internal projector temperature is too high. (pp.61, 68-69) q r LAMP REPLACE indicator This LAMP REPLACE indicator lights orange when any of projection lamps is nearing its end, and w flashes when any of them becomes out - Sanyo PLC-XF47 | Owners Manual - Page 14
cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any other chemical materials. q ON/STAND-BY button Turn the projector on MENU. -Pan the image in DIGITAL ZOOM +/- mode. (p.39) y LENS SHIFT button Select the LENS SHIFT function. (p.27) u ZOOM buttons Zoom in and out the - Sanyo PLC-XF47 | Owners Manual - Page 15
the case clean and install new batteries. ● Risk of an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Remote Control Receivers and Operating Range 16.4' Point the remote control toward the projector (to (5 m) Infrared Remote - Sanyo PLC-XF47 | Owners Manual - Page 16
holding down the MENU button, press the IMAGE ADJ. button corresponding times to the number of the remote control code for the projector. Use position Reset position Reset switch Remote Control Code Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Number of Times Pressing IMAGE ADJ - Sanyo PLC-XF47 | Owners Manual - Page 17
the specifications of Projection Lens, refer to the manual attached separately or contact sales dealer where you purchased the projector. 2. For installation, refer to the installation manual accompanying a Projector. When setting a projector after lens installation, be sure to replace a Lens Cap - Sanyo PLC-XF47 | Owners Manual - Page 18
Installation Lens Shift Adjustment Projection lens can be moved from side to side and up and down with the motor-driven lens shift until picture is projected on proper position. Rotate rear adjustable feet to stabilize the projector on a table. 3 Press the knob and retract the handle. LEVEL AND - Sanyo PLC-XF47 | Owners Manual - Page 19
holding handle. 3 Replace the terminal. Insert a new terminal along Guide to fit Plug into Socket. 4 Tighten screws to secure the terminal. NOTES ON ORDERING OR USING OPTIONAL INTERFACE BOARD When ordering or using Optional Interface Board (Terminal Board), contact your sales dealer. When contacting - Sanyo PLC-XF47 | Owners Manual - Page 20
Installation Connecting to Computer Cables used for connection • VGA Cable (D-sub 15 pin) * • DVI Cable • BNC Cable (BNC x 5) ( *One cable is supplied; Other cables are not supplied with this projector.) Laptop type Desktop type Monitor Output Monitor Output Monitor Output BNC Cable ✽ DVI - Sanyo PLC-XF47 | Owners Manual - Page 21
Connecting to Video Equipment Cables used for connection • Video Cable (BNC x 3, BNC x 1) • SCART-VGA Cable • DVI Cable • S-Video Cable ( Cables are not supplied with the projector.) Video Source (example) Video Cassette Recorder Video Disc Player Installation Component video output equipment. ( - Sanyo PLC-XF47 | Owners Manual - Page 22
Installation Connecting the AC Power Cord This projector uses dealer or service station. Connect the projector with all peripheral equipment before turning on the projector. CAUTION The be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer. Projector side - Sanyo PLC-XF47 | Owners Manual - Page 23
will disappear after 20 seconds. Selected Input Source and Lamp control Lamp mode See page 56 for the Lamp control status ✔Note: • The Lamp replacement icon and the Filter warning icon may appear on the screen depending on the usage state of the projector. PIN code Input Dialog Box After the OK icon - Sanyo PLC-XF47 | Owners Manual - Page 24
BEFORE THE READY INDICATOR LIGHTS GREEN AGAIN. OTHERWISE IT WILL RESULT IN SHORTENING OF THE LAMP LIFE. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS. "Power off - Sanyo PLC-XF47 | Owners Manual - Page 25
projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the side control or the remote control to display the On-Screen Menu. 2 Use Control MENU MENU button LENS SHIFT INPUT 1/2 - Sanyo PLC-XF47 | Owners Manual - Page 26
/Ceiling/Rear/Reset/Digital zoom +/-] (pp.38-39). i Setting Menu Used to set the projector's operating configurations (pp. 47-54). o Information Menu Display the input source information(p. 28). For Video Source q w e r tyu i q Guide Window Show the selected Menu of the On-Screen Menu. w Input - Sanyo PLC-XF47 | Owners Manual - Page 27
with Projector Control Zoom Adjustment Display "Zoom" on the screen. Use the ZOOM ed buttons to zoom in and out the image. Focus Adjustment Display "Focus" on the screen. Use the FOCUS ed buttons to adjust focus of the image. Lens Shift Adjustment Display "Lens shift" on the screen. Use the - Sanyo PLC-XF47 | Owners Manual - Page 28
be done easily by pressing this button. See page 34 for details. LENS SHIFT button See page 27 for details. ZOOM buttons Press the ZOOM Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFO. - Sanyo PLC-XF47 | Owners Manual - Page 29
, press the P-TIMER button again. P-Timer display KEYSTONE button Press the KEYSTONE button on the remote control. The "Keystone" appears on the screen. Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (pp.39, 43). • The white arrows indicate that - Sanyo PLC-XF47 | Owners Manual - Page 30
Input Selection Input ZOOM SidFeOCCUSontrol ON/STAND-BY MENU LENS SHIFT INPUT 1/2 SELECT INPUT 3/4 INPUT 1/2 button INPUT and INPUT 2, or INPUT 3 and INPUT 4 as you press the INPUT button. Before using the INPUT button on the side control, you must select a correct input source by On-Screen - Sanyo PLC-XF47 | Owners Manual - Page 31
15 Board 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. INPUT MENU 2 Use specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector - Sanyo PLC-XF47 | Owners Manual - Page 32
Input Selection Video Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 Board When connecting to video equipment, select the type of Video source in the Source Select Menu. INPUT MENU RGB (Scart) When scart video equipment - Sanyo PLC-XF47 | Owners Manual - Page 33
projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, or UXGA (refer to "Compatible Computer Specifications between your computer and the projector. (See "Troubleshooting" on page 64.) Mode 1 The preset system is manually adjusted in the PC Adjust - Sanyo PLC-XF47 | Owners Manual - Page 34
Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon. 2 Use projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL FOCUS ON/STAND-BY Side Control MENU LENS SHIFT INPUT 1/2 SELECT INPUT 3/4 AUTO - Sanyo PLC-XF47 | Owners Manual - Page 35
projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. Fine sync Use the Point 7 8 buttons to adjust the - Sanyo PLC-XF47 | Owners Manual - Page 36
Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the SELECT button. Move the red - Sanyo PLC-XF47 | Owners Manual - Page 37
Input ZOOM FOCUS ON/STAND-BY Side Control MENU LENS SHIFT INPUT 1/2 SELECT INPUT 3/4 AUTO PC ADJ Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 2 Use the the projector. Real Picture level with improved halftone for graphics. IMAGE 1-10 User preset - Sanyo PLC-XF47 | Owners Manual - Page 38
), the projector enters to the panning mode automatically. Use the Point XGA (1024 x 768) is modified to fit the screen size in initial mode. • The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 36) Custom Adjust the screen scale and position manually - Sanyo PLC-XF47 | Owners Manual - Page 39
correct keystone distortion. (p.29) Ceiling When this function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is - Sanyo PLC-XF47 | Owners Manual - Page 40
Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button. Video Jack or S-Video Jack Auto The projector the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video - Sanyo PLC-XF47 | Owners Manual - Page 41
/STAND-BY Side Control MENU LENS SHIFT INPUT 1/2 SELECT INPUT Use the Point ed buttons to move the red frame pointer to the desired image level and then press the SELECT button. Standard Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. IMAGE 1-10 User - Sanyo PLC-XF47 | Owners Manual - Page 42
. 2 Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. Normal Provide the image at the normal video aspect ratio of 4:3. Wide Provide the image at the wide screen ratio of 16:9. Custom Adjust the screen scale and position manually with - Sanyo PLC-XF47 | Owners Manual - Page 43
correct keystone distortion. (p.29) Ceiling When this function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is - Sanyo PLC-XF47 | Owners Manual - Page 44
, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. You can store up to eight (8) color management data. 1 Use the Point ed buttons to move the red frame pointer to Color Management, and then press the - Sanyo PLC-XF47 | Owners Manual - Page 45
confirmation box appears and then select [Yes]. MENU The same function as stated above. COLOR M. The same function as stated above. Auto picture control Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2). Off . . . . . Auto picture control OFF position. L1 - Sanyo PLC-XF47 | Owners Manual - Page 46
31). Gamma Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Noise reduction "On." Film . . . . For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. ✔Note: • Picture is distorted at - Sanyo PLC-XF47 | Owners Manual - Page 47
when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough when no input signal is detected. Blue . . . . Blue colored background. User . . . . The image you captured. Black . . . Black colored background - Sanyo PLC-XF47 | Owners Manual - Page 48
. Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture function and set it to "User". Then the captured image will be displayed the next time you turn on the projector. To cancel the Capture function, - Sanyo PLC-XF47 | Owners Manual - Page 49
Logo PIN code is set to "4321" at the factory. Enter a Logo PIN code Use the Point ed buttons on the side control or on the remote control to enter a can change the Logo PIN code lock setting. If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to - Sanyo PLC-XF47 | Owners Manual - Page 50
Projector is equipped with 4 Projection Lamps and the number of using lamps can be switched to 4 lamps or 2 lamps. Using 2 lamps maintains the life of Projection Lamps. To change over Lamp Mode Press the Point ed buttons to move the red frame pointer to "Lamp mode". Set "4 lamps mode" or "2 lamps - Sanyo PLC-XF47 | Owners Manual - Page 51
remote control. See "Remote Control Receivers and Operating Range" on page 15 for details. Both......... Activate both the front and back receiver. as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period. - Sanyo PLC-XF47 | Owners Manual - Page 52
the remote control. . . . . . Lock the remote control buttons. To unlock, use the side control. If the side control accidentally becomes locked and you do not have the remote control nearby and unable to operate the projector, contact the service station. PIN code lock This function prevents the - Sanyo PLC-XF47 | Owners Manual - Page 53
the PIN code Projector ID This feature allows users to set serial communication configuration (Projector ID) when several projectors are connected via the RS-232C terminal (serial port) of the projector. Use the Point 7 8 buttons to adjust the Projector ID. ● Projector ID ... 1 - 999. (Factory - Sanyo PLC-XF47 | Owners Manual - Page 54
on page 58. ✔Note: • The Lamp replacement icon will not appear when the Display function is set to "Off" (p.47), during "Freeze" (p.28), or "No show" (p.29). Filter counter This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings - Sanyo PLC-XF47 | Owners Manual - Page 55
the LCD Panels and Projection Mirrors degrading the picture quality. Do not put anything into the air intake vents. Doing so may result in a malfunction of the projector. Failure to properly clean the projector's air filters (in accordance with the instructions in your Projector's Operating Manual - Sanyo PLC-XF47 | Owners Manual - Page 56
darker or the color becomes unnatural, replace lamp. (LAMP REPLACE indicator lights orange.) LAMP STATUS DISPLAY X Mark on Lamp (LAMP REPLACE indicator flashes orange.) Projection lamp is defective or fails to be turned on. Restart a projector on, and make sure lamp is on. If this mark still - Sanyo PLC-XF47 | Owners Manual - Page 57
Maintenance and Care Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is - Sanyo PLC-XF47 | Owners Manual - Page 58
the lamp counter. ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. ● Model No. of your projector : PLC-XF47/PLC-XF47K ● Replacement Lamp Type No. : POA-LMP109 (Service Parts - Sanyo PLC-XF47 | Owners Manual - Page 59
the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator - Sanyo PLC-XF47 | Owners Manual - Page 60
of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Unplug the - Sanyo PLC-XF47 | Owners Manual - Page 61
if the air vents of the projector are not blocked. - Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. - Is the filter clean? Clean the filter. The projector is shut down; and the LAMP indicator is - Sanyo PLC-XF47 | Owners Manual - Page 62
" are not chosen at Display function. (See "SETTING" section on page 47) - Make sure "User" or "Off" are not chosen at Logo select function. (See "SETTING" section on page 48) appears on the screen - The end of lamp life is approaching. Replace the lamp with a new one promptly. (See page 57) 62 - Sanyo PLC-XF47 | Owners Manual - Page 63
if "Image level" is selected properly. (See pages 37, 41) - Check the Lamp control function. ( See "SETTING" section on page 50) - Check the Lamp replace indicator. If it lights, the end of lamp life is approaching. Replace the lamp with a new one promptly. (See page 57) - T he image is darker - Sanyo PLC-XF47 | Owners Manual - Page 64
Appendix WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Sanyo PLC-XF47 | Owners Manual - Page 65
Input H-sync freq. V-sync freq. Screen Language Lamp mode Lamp control Power management Security Key lock PIN code lock 63 0-63 0-63 Offset Red/Green/Blue Sharpness Gamma Noise reduction ] Progressive ] 0-31 0-15 Off/On Off/On/Film Reset Store Yes / No Image 1 Image 10 Quit Quit ✽ - Sanyo PLC-XF47 | Owners Manual - Page 66
Appendix Computer Input System (1) Mode 1 Mode 2 SVGA 1 SVGA 2 SVGA 3 ✽ System displayed in the System Menu varies depending on the input signal. PC Adjust Auto PC adj. Fine sync. Total dots Position H Position V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit - Sanyo PLC-XF47 | Owners Manual - Page 67
/User/Black Logo select User/Default/Off Capture Yes/No Logo PIN code lock On/Off Logo PIN code change Quit Quit 4-Lamp mode/ 2-Lamp Off Projector Remote Control PIN code lock Off/On1/On2 PIN code change Projector ID Lamp counter Quit Hour(s) Quit Reset Yes/No Filter counter Used - Sanyo PLC-XF47 | Owners Manual - Page 68
Condition Check the indicators for the projector condition. The projector is operating normally. LAMP red Indicators READY green WARNING LAMP TEMP. REPLACE red orange Projector Condition The projector is off. (The main switch is OFF position or the AC power cord is unplugged.) ✽ The - Sanyo PLC-XF47 | Owners Manual - Page 69
. Check and clean the filter. Any of 4 lamps becomes out, Lamp Mode is changed over from 4 lamps to 2 ✽ lamps. And when any of 2 lamps are out, a projector operates with 1 lamp. ✽ ✽ ✽ The lamp has been used overtime. Replace the lamp immediately and then reset the lamp counter. The indicator - Sanyo PLC-XF47 | Owners Manual - Page 70
Specifications Basically this projector SVGA 8 SVGA 9 SVGA 10 SVGA 11 MAC 16 XGA 1 XGA 2 XGA 3 XGA 4 XGA 5 XGA 6 XGA 7 XGA 8 XGA 9 XGA 10 XGA 11 XGA 12 XGA 13 XGA 14 XGA 15 MAC 19 SXGA 1 SXGA 2 SXGA 3 SXGA 72.810 75.000 85.000 66.600 66.670 59.880 50.000 50.000 60.000 56.250 60.320 75.000 85.060 72 - Sanyo PLC-XF47 | Owners Manual - Page 71
28.125 33.750 28.125 27.000 58.069 60.190 60.120 59.900 60.000 50.000 60.000 60.000 50.000 60.000 50.000 48.000 ✔Note: • Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. • Specifications are subject to change without notice - Sanyo PLC-XF47 | Owners Manual - Page 72
Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 22.87" x 9.902" x 32.11" (581 mm x 251.5 mm x 815.5 mm) (Not including adjustable feet) Net Weight 80.3 lbs (36.5 kg) Feet Adjustment 0˚ to 5.7˚ Panel Resolution LCD - Sanyo PLC-XF47 | Owners Manual - Page 73
● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. ● Each projector has - Sanyo PLC-XF47 | Owners Manual - Page 74
No Connect 6 DDC Clock 7 DDC Data 8 No Connect 9 T.M.D.S. Data1- 10 T.M.D.S. Data1+ 11 T.M.D.S. Data1 Shield 12 No Connect 13 No Connect 14 +5V Power 15 Ground (for +5V) 16 Hot Plug Detect 17 T.M.D.S. Data0- 18 T.M.D.S. Data0+ 19 T.M.D.S. Data0 Shield 20 No Connect 21 No Connect 22 T.M.D.S. Clock - Sanyo PLC-XF47 | Owners Manual - Page 75
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Logo PIN Code Lock No. Factory default set No: 1 2 3 4* Factory default set - Sanyo PLC-XF47 | Owners Manual - Page 76
Appendix Dimensions Unit: inch (mm) 2.36 (60) 9.9 (251.5) 5.7° 9.90 (251.5) 1.28 (32.5) 22.87 (581) 5.18 (131.5) 17.56 (446) 7.01 (178) 7.01 (178) 22.93 (582.5) 10.61 (269.5) 32.11 (815.5) 161° 9.90 (251.5) 20.58 (522.7) 3.66 (93) 1.57 (40) 8.27 (210) 8.27 (210) 3.26 (82.8) 9.72 (247) 14. - Sanyo PLC-XF47 | Owners Manual - Page 77
and monitor the projector's operations by using the RS-232C serial port. Operation 1 Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial UP Focus DOWN Focus UP Lens shift UP Lens shift DOWN Lens shift LEFT Lens shift RIGHT Auto PC Adj. Keystone UP Keystone DOWN Keystone - Sanyo PLC-XF47 | Owners Manual - Page 78
. Cooling down at Power Management mode Power Management mode after Cooling down Cooling down after the projector is turned off when the lamps are out. Stand-by mode after Cooling down when the lamps are out. Stand-by mode after Cooling down at the temperature anomaly. S1 = Temperature at Sensor - Sanyo PLC-XF47 | Owners Manual - Page 79
KE3A SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
 |
 |
Multimedia Projector
MODEL
PLC-XF47
Owner’s Manual
✽
Projection lens is optional.
PLC-XF47K