Sanyo PLC-XF47 Owners Manual - Page 54

Factory default, Test pattern, Filter counter, Fig°1, Lamp counter, filter

Get Sanyo PLC-XF47 - XGA LCD Projector PDF manuals and user guides
UPC - 086483068959
View all Sanyo PLC-XF47 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Setting Lamp counter This function is used to reset the lamp counter. When the lamp life reaches a recommended lamp replacement time, the time shown in the dialog box turns red and the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching. When replacing the projection lamp, reset the lamp counter. See "Resetting the Lamp Counter" on page 58. ✔Note: • The Lamp replacement icon will not appear when the Display function is set to "Off" (p.47), during "Freeze" (p.28), or "No show" (p.29). Filter counter This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to "Resetting the Filter Counter" on page 55. Test pattern Various test pattern are available for use when setting up the projector. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, filter counter and filter timer to the factory default settings. Quit Exit the Setting Menu. This icon appears on the screen when the end of lamp life is approaching. ✔Note: • This icon also appears at turning on and selecting input source. Filter counter Set the red frame pointer to the item and press the SELECT button. Use the Point 7 8 buttons to set the timer. Select from (Off/ 100H/300H/500H) depending on the use environment Fig.1 Filter warning icon Filter warning icon appears on the screen at a set time. ✔Note: • Fig.1 appear at turning on and selecting input source. • Fig.1 will not appear when the Display function is set to "Off" (p.47), during "Freeze" (p.28), or "No show" (p.29). Factory default Set the red frame pointer to the item and press the SELECT button. Select Factory default and this box appears. Select [Yes], and the next box appears. 54 Select [Yes] to activate it.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
54
Factory default
This function returns all setting values except for the user logo,
PIN code lock, Logo PIN code lock, lamp counter, filter counter
and filter timer to the factory default settings.
Factory default
Quit
Exit the Setting Menu.
Select Factory default and this box
appears. Select [Yes], and the next
box appears.
Test pattern
Various test pattern are available for use when setting up the
projector.
Filter counter
Filter counter
Filter warning icon appears on the screen at
a set time.
Fig°1
Filter warning icon
✔
Note:
• Fig.1 appear at turning on and selecting input
source.
• Fig.1 will not appear when the Display function
is set to “Off” (p.47), during “Freeze” (p.28), or
“No show” (p.29).
Set the red frame pointer
to the item and press the
SELECT button.
Set the red frame pointer
to the item and press the
SELECT button.
Use the Point
7 8
buttons
to set the timer. Select from
(Off/ 100H/300H/500H)
depending on the use
environment
Setting
Select [Yes] to
activate it.
This function is used to set a frequency for the filter
cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon appears on the screen,
notifying the cleaning is necessary. After cleaning the
filter, be sure to select RESET and set the timer. The Filter
warning icon will not turn off until the filter counter is
reset.
For details about resetting the timer, refer to “Resetting
the Filter Counter” on page 55.
Lamp counter
This function is used to reset the lamp counter.
When the lamp life reaches a recommended lamp replacement
time, the time shown in the dialog box turns red and the Lamp
replacement icon appears on the screen, indicating that the end
of lamp life is approaching.
When replacing the projection lamp, reset the lamp counter.
See “Resetting the Lamp Counter” on page 58.
This icon appears on the screen when the end of lamp life is
approaching.
✔
Note:
• This icon also appears at turning on and
selecting input source.
✔
Note:
• The Lamp replacement icon will not appear when the Display
function is set to “Off” (p.47), during “Freeze” (p.28), or “No
show” (p.29).