Sanyo PLC-XU07N Owners Manual

Sanyo PLC-XU07N - XGA LCD Projector Manual

Get Sanyo PLC-XU07N - XGA LCD Projector PDF manuals and user guides View all Sanyo PLC-XU07N manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU07N manual content summary:

  • Sanyo PLC-XU07N | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XU07N Owner's Manual
  • Sanyo PLC-XU07N | Owners Manual - Page 2
    service requests were not caused by problems with our projectors. They were caused by problems that could have been prevented, if the owner had followed the instructions in the manual. You can often correct operating problems yourself. If your projector fails to work properly, see "TROUBLESHOOTING
  • Sanyo PLC-XU07N | Owners Manual - Page 3
    be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the
  • Sanyo PLC-XU07N | Owners Manual - Page 4
    OF THE REMOTE CONTROL 16 TOP CONTROLS AND INDICATORS 18 APPENDIX 33 OPERATING ON-SCREEN MENU 19 OPERATING WIRELESS MOUSE 33 MAINTENANCE 34 BASIC OPERATIONS AIR FILTER CARE AND CLEANING 34 21 LAMP REPLACEMENT 35 TROUBLESHOOTING 36 TURNING ON / OFF THE PROJECTOR 21 TECHNICAL
  • Sanyo PLC-XU07N | Owners Manual - Page 5
    durability, and ease for use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. x Compatibility This projector is compatible with many different types of personal computers and video devices, including; q IBM
  • Sanyo PLC-XU07N | Owners Manual - Page 6
    PROJECTOR FRONT OF THE CABINET PROJECTION LENS INFRARED REMOTE RECEIVER SPEAKER (Monaural) LENS COVER BACK OF THE CABINET EXHAUST VENT HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector the projector is used. POWER CORD CONNECTOR BOTTOM OF THE
  • Sanyo PLC-XU07N | Owners Manual - Page 7
    is basically designed to project on a flat projection surface. q The projector can be focused from 4.6'(1.4m) ~ 35.4'(10.8m). q Refer to the figure below to adjust the screen size. 35.4' (10.8m) 300" H1 230" H2
  • Sanyo PLC-XU07N | Owners Manual - Page 8
    into any other type of power system. Consult your authorized dealer or service station if your are not sure of the type of power supply being in use. Connect the projector with the peripheral equipment before turning the projector on. (Refer to pages 10 ~15 for connection.) CAUTION For the safety
  • Sanyo PLC-XU07N | Owners Manual - Page 9
    q Do not drop or give a shock to the projector, otherwise damages or malfunctions may result. q When carrying the projector, use a carrying case recommended by Sanyo. q Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to
  • Sanyo PLC-XU07N | Owners Manual - Page 10
    OUTPUT TERMINAL Connect to the monitor to this terminal. (Refer to P12 ~15.) CONTROL PORT CONNECTOR When controlling the computer with the Remote Control of this projector, connect the mouse port to this connector. (Refer to P12 ~15.) COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO
  • Sanyo PLC-XU07N | Owners Manual - Page 11
    V These cables are not supplied with this projector. Video / Audio Output Video Audio Cable V S-VIDEO Output S-VIDEO Cable V Use the either of VIDEO jack or S-VIDEO jack. When the both jacks are connected, the S-VIDEO jack has priority over the VIDEO jack. COMPUTER IN MONITOR OUT Terminals of
  • Sanyo PLC-XU07N | Owners Manual - Page 12
    IBM-compatible computer, refer to the figure below. Used cables for connection • VGA CABLE • CONTROL CABLE FOR PS/2 PORT • CONTROL CABLE FOR SERIAL PORT V • MONITOR CABLE V • PC AUDIO CABLE (stereo) V V These cables are not supplied with this projector. NOTE : When connecting the cable, the power
  • Sanyo PLC-XU07N | Owners Manual - Page 13
    CONNECTING THE PROJECTOR COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT R-AUDIO-L VIDEO (MONO) ˝
  • Sanyo PLC-XU07N | Owners Manual - Page 14
    Monitor Output ADB port ON DIP 1 234 5 6 MAC Adapter V Set the switches depending on the RESOLUTION MODE that you want to use before your turn on the projector and computer Terminal Audio Output Audio Input Audio Cable V (stereo) Monitor Cable V VGA Cable Control Cable for ADB Port V
  • Sanyo PLC-XU07N | Owners Manual - Page 15
    Set the switches as shown in the table below depending on the RESOLUTION ON MODE that you want to use before your turn on the projector and computer. OFF ON DIP 123456 1 2 3 4 56 13" MODE (640 x 480) ON IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT R-AUDIO-L VIDEO (MONO) ˝
  • Sanyo PLC-XU07N | Owners Manual - Page 16
    BEFORE OPERATION OPERATION OF THE REMOTE CONTROL This remote control unit is not only able to operate the projector but also usable as a wireless mouse for a PC. POINT button and two CLICK buttons are used for wireless mouse operation. (Refer to page 33.) Wireless mouse is usable when PC mouse
  • Sanyo PLC-XU07N | Owners Manual - Page 17
    with a used battery. q Avoid contact with water or liquid. q Do not drop the remote control unit. q If batteries have leaked on the remote control, carefully wipe the case clean and load new batteries. Operating Range of the Remote Control Point the remote control toward the projector (Receiver
  • Sanyo PLC-XU07N | Owners Manual - Page 18
    is lit in green when the projector is ready to be turned on. READY LAMP LAMP INDICATOR This indicator is lit in dim when the projector is turned on. And the light is brightened when the projector is in stand-by mode. POWER ON-OFF BUTTON Used to turn the projector on or off. (Refer to P21
  • Sanyo PLC-XU07N | Owners Manual - Page 19
    TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to by pressing POINT button(s) on the Top Control or on the Remote Control Unit. WIRELESS REMOTE CONTROL POINT BUTTON Used to move the Pointer to UP/ DOWN/ RIGHT/ LEFT. 2
  • Sanyo PLC-XU07N | Owners Manual - Page 20
    to adjust the Sound Volume, or to select Mute. (Refer to P23) MENU BAR IN VIDEO MODE Press MENU BUTTON while being in Video mode. MODE MENU Used to select the Video input. (Refer to P30) IMAGE MENU Used to adjust the picture image. [Color / Tint / Contrast / Brightness/ Sharpness] (Refer to P31
  • Sanyo PLC-XU07N | Owners Manual - Page 21
    Remote Control Unit or on the Top Control, and the message "Power off?" appears on the screen. 2 Press again the power ON-OFF button to turn off the projector. The LAMP call your authorized dealer or service station. NOTE : The Cooling Fan may work for cooling while the projector is turned off. When
  • Sanyo PLC-XU07N | Owners Manual - Page 22
    of the image by pressing FOCUS / or FOCUS v/w buttons. Focus The message disappears after 4 seconds. NO SHOW FUNCTION Press the NO SHOW button on the Remote Control Unit to turn the picture into black image. These function is cancelled when the NO SHOW button is pressed again or any other function
  • Sanyo PLC-XU07N | Owners Manual - Page 23
    box appears on the screen for a few seconds. (+) button to increase the volume, and (-) button decreasing. Sound Mute Setting Press the MUTE button on the Remote Control Unit to cut off the sound. To restore the sound to its previous level, press the MUTE button again or press VOLUME (+/-) buttons
  • Sanyo PLC-XU07N | Owners Manual - Page 24
    is no signal input from the computer. Make sure the connection of the computer and the projector is set correctly. (Refer to TROUBLESHOOTING on page 36.) Selecting Computer System Manually To set the Computer system manually, select the mode on the ONSCREEN MENU. 1 Press the MENU button and the ON
  • Sanyo PLC-XU07N | Owners Manual - Page 25
    standard ones and may not be detected by this projector. If this happens, the projector cannot reproduce a proper image and the image is below dialog box appears. This Mode has parameters being stored. The Vacant Mode. Manual set Computer Mode (1 to 8). It closes the PC ADJUSTMENT Menu. Move the
  • Sanyo PLC-XU07N | Owners Manual - Page 26
    COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 165 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION VGA 1
  • Sanyo PLC-XU07N | Owners Manual - Page 27
    COMPUTER MODE PICTURE IMAGE ADJUSTMENT Adjust Picture Image Manually 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button.
  • Sanyo PLC-XU07N | Owners Manual - Page 28
    flicker from the display. This item can be adjusted manually. (Refer to page 27.) Total Dots The number of the total dots in preset on this projector by the factory and can be restored anytime by pressing the NORMAL button (located on the Top Control or on the Remote Control Unit). The
  • Sanyo PLC-XU07N | Owners Manual - Page 29
    . PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize (1024 x 768), this projector becomes Digital Zoom mode automatically than the screen size. q This projector cannot display in the resolution over to the lower before connecting the projector. q The image data in other than
  • Sanyo PLC-XU07N | Owners Manual - Page 30
    Remote Control Unit. The input source is selected among VIDEO or COMPUTER. The "Video" or "Computer" display will appear on the screen for a few seconds. Video Video System is PAL-M select the system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M If the projector cannot reproduce the proper video
  • Sanyo PLC-XU07N | Owners Manual - Page 31
    this projector by the factory and can be restored anytime by pressing the NORMAL button (located on the Top Control or on the Remote Control ). The "Normal" display will be displayed on the screen for a few seconds. Normal VIDEO MODE It indicates the roughly
  • Sanyo PLC-XU07N | Owners Manual - Page 32
    "On" position, this projector will produce a blue image without video noise on the screen when the video source is unplugged or turned Lamp age The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lamp replacement monitor timer by using
  • Sanyo PLC-XU07N | Owners Manual - Page 33
    mouse pointer is displayed on the screen. When the menu or indicator of the projector is displayed on the screen instead of the PC mouse pointer, the wireless mouse cannot be used. Installation To use the Wireless Remote Control Unit as the Wireless Mouse for a PC, installation of the mouse driver
  • Sanyo PLC-XU07N | Owners Manual - Page 34
    from the air filter by following instruction in the AIR FILTER CARE AND Request service from an authorized dealer or service station LCD Panel and the Mirror, and it may spoil the fine picture image. AIR FILTER RECOMMENDATION We recommend to avoid dusty/smoky place for operating the projector. Using
  • Sanyo PLC-XU07N | Owners Manual - Page 35
    REPLACEMENT HANDLE MONITOR TIMER, when the lamp is not replaced. LAMP ASSEMBLY ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. information to the dealer. q Model No. of your projector : PLC-XU07N q Replacement Lamp Type No. : POA-LMP19J (Service Parts No. 610 278 3896
  • Sanyo PLC-XU07N | Owners Manual - Page 36
    APPENDIX TROUBLESHOOTING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in section "CONNECTING THE PROJECTOR" on pages 10 ~ 15. 2. Check cable connection. Verify that
  • Sanyo PLC-XU07N | Owners Manual - Page 37
    before your turn on the computer. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. Sanyo Service is easily obtained. If after following all operating instructions, you find that service is necessary, contact the SFS Corporation in Los Angeles, or the
  • Sanyo PLC-XU07N | Owners Manual - Page 38
    Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System Scanning Frequency Projection Image size (Diagonal) Horizontal Resolution Projection Lens Throw Distance Projection Lamp ) Owner's Manual AC Power Cord Remote Control Transmitter
  • Sanyo PLC-XU07N | Owners Manual - Page 39
    OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give the name and the Type No. of it to the sales dealer. q Control Cable for Serial Port Type No. : POA-MC12SRL q Control Cable for ADB Port Type No. : POA-MC12MAC q MAC Adapter Type No. : POA-MACAP 39
  • Sanyo PLC-XU07N | Owners Manual - Page 40
    SANYO INDUSTRIAL VIDEO LCD PROJECTOR LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from and Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. the names and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Owner's Manual
PLC-XU07N
Multimedia Projector
MODEL