Sanyo PLC-XU355 Instruction Manual, PLC-XU355A - Page 38

Computer Input Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the title Custom is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V .......... Adjust the Horizontal/Vertical screen scale. H&V When set to On, the aspect ratio is fixed. Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V ..... Adjust the Horizontal/Vertical screen position. Common Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at yes. When Custom is selected, the saved scale is used. Reset Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at yes. For zooming in and out the images Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control. Digital zoom - Select Digital zoom -. The On-Screen Menu disappears and D. zoom - appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM ▲▼ buttons, SELECT and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 29-30) again or adjust the screen size with the D.ZOOM ▲▼ buttons. 3 Note: • When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. Remote Control POINT buttons SELECT button D.ZOOM + button D.ZOOM - button Note: • The panning function may not operate properly if the stored Mode in the PC adjust Menu is used (p.34). • The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size. • True, Full, and Digital zoom +/- cannot be selected when 0i, 55i, 0p or 55p is selected in the PC System Menu (p.31). • Digital zoom +/- cannot be selected when Full or True is selected.