Sanyo PLC-XU355 Instruction Manual, PLC-XU355A - Page 60

Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control to display the Information Menu. Remote Control Menu Operation Press the Point ▲▼ buttons to select Information. The Information Menu is displayed. See below for displayed information. INFO. button Input The selected input source is displayed. Information Menu H-sync freq. KHz The horizontal frequency of the input signal is displayed in Hz KHz or - - - - KHz when no signal. V-sync freq. H The vertical frequency of the input signal is displayed in Hz or - - - - Hz when no signal. Numbers of Hz doubles when during Interlace. Screen The selected screen size is displayed. Language The selected language is displayed. Lamp status The selected lamp mode is displayed. Lamp counter The cumulative lamp operating time is displayed. Power management Off , Ready , Shut down or Timer is displayed. Key lock The selected Key lock icon is displayed. PIN code lock Off , On is displayed. Remote control The selected remote code is displayed. 0