Sanyo WXU700 Instruction Manual, PLC-WXU700 - Page 62

Setting Filter counter This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select Reset and set the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to "Resetting the Filter Counter" on page 65. Fig.1 Filter warning icon Filter warning icon appears on the screen at a set time. Note: This icon also appears at turning on. Note: The Filter warning icon (Fig.1) will not appear when the Display function is set to Off (p.49), during "Freeze"(p.28), or "No show" (p.29). Filter counter 32H Press the SELECT button to select Timer and then use the Point ▲▼ buttons to set the timer. Select from (Off/100H/ 200H/ 300H) depending on the use environment. Factory default Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order. Note: When the Factory default function is executed, all the warning log records will be deleted. Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock and Filter counter to the factory default settings. 62