Schwinn 225 Recumbent Bike Assembly and Owner's Manual - Page 14
Remove Hardware from Console, Connect Cables and Attach Console to Frame Assembly
View all Schwinn 225 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
* * 10. Remove Hardware from Console 9 NOTICE: Do not crimp the cables. Note: Hardware is pre-installed ( * ). X4 11. Connect Cables and Attach Console to Frame Assembly NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp Console Cable. Do not fully tighten the hardware. X4 14
14
10. Remove Hardware from Console
NOTICE:
Do not crimp the cables.
Note:
Hardware is pre-installed (
*
).
11. Connect Cables and Attach Console to Frame Assembly
NOTICE:
Align the clips on the cable connectors and make sure the connectors lock. Do
not crimp Console Cable. Do not fully tighten the hardware
.
9
*
X4
*
X4