Schwinn 231 Recumbent Bike Assembly Manual - Page 16
Step 9 Install Seat Assembly
View all Schwinn 231 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ASSEMBLY INSTRUCTIONS Step 9 Install Seat Assembly Parts: • Seat Assembly (From step 3-6) • Seat Rail (Ref. H) • Seat Rail Bracket (Ref. D-22) Tools: • Supplied Allen Wrench 9-1 Pull out on the Seat Adjustment Knob (K-3) while sliding the Seat Assembly onto the Seat Rail (H). Release the Adjustment Knob to lock the Seat Assembly in place. NOTE: Make sure the seat Adjustment Knob is on the side of the Seat Rail that has the holes. 9-2 Reinstall the Seat Rail Bracket. 9-3 Reconnect the Heart Rate Wires and Reinstall the Seat Rail with Seat Assembly on the main unit. NOTE: After reconnecting the Heart Rate Wires, tuck them into the hole in the frame to avoid pinching the wires. 9-4 Connect the Heart Rate Wire (M) to the jack on the junction box labeled "HAND PULSE". (Figure B) Figure B H M D-22 K-3 Figure A 15