Schwinn 231 Recumbent Bike Assembly Manual - Page 17
Step 10 Install Handlebar Mast
View all Schwinn 231 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ASSEMBLY INSTRUCTIONS Step 10 Install Handlebar Mast Parts: • Handlebar Mast (Ref C) Tools: • Supplied Allen Wrench 10-1 Remove the four Allen Bolts (C-1) and Curved Washers (C-2) from the frame . 10-2 Connect the Upper and Lower Computer Wires and Heart Rate Wires. (Detail A) 10-3 Insert the Handlebar Mast (C) into the main unit. 10-4 Re-install the four Allen Bolts and Curved Washers and completely tighten. C Detail A C-2 C-1 16
ASSEMBLY INSTRUCTIONS
16
C
C-1
Step 10 Install Handlebar Mast
Parts:
•
Handlebar Mast (Ref C)
Tools:
• Supplied Allen Wrench
10-1
Remove the four Allen Bolts (C-1) and Curved Washers (C-2)
from the frame .
10-2
Connect the Upper and Lower Computer Wires and Heart Rate
Wires.
(Detail A)
10-3
Insert the Handlebar Mast (C) into the main unit.
10-4
Re-install the four Allen Bolts and Curved Washers and
completely tighten.
Detail A
C-2