Schwinn 231 Recumbent Bike Assembly Manual - Page 20
Step 13 Install Computer
View all Schwinn 231 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ASSEMBLY INSTRUCTIONS Step 13 Install Computer Parts: • Computer (Ref. A ) Tools: • Supplied Phillips Head Screwdriver 13-1 Remove the four screws from the back of the Computer (A). 13-2 Feed the Fan Wire (M) through the slot in the Computer Bracket (A-1) and insert it in the receptical found in the slot on the back of the Computer. 13-3 Connect the Heartrate Wire (C-3) from the mast to the lead coming out of the back of the Computer. 13-4 Connect the Computer Wires (C-4) to the slotted connection in the back of the Computer. 13-5 Align the Computer with the holes in the Computer Bracket.(A-1) 13-6 Re-install and completely tighten the hardware. A M A-1 C-4 C-3 19
19
ASSEMBLY INSTRUCTIONS
Step 13 Install Computer
Parts:
•
Computer
(Ref. A )
Tools:
• Supplied
Phillips Head Screwdriver
13-1
Remove the four screws from the back of the Computer (A).
13-2
Feed the Fan Wire (M) through the slot in the Computer Bracket
(A-1) and insert it in the receptical found in the slot on the back
of the Computer.
13-3
Connect the Heartrate Wire (C-3) from the mast to the lead
coming out of the back of the Computer.
13-4
Connect the Computer Wires (C-4) to the slotted connection in
the back of the Computer.
13-5
Align the Computer with the holes in the Computer Bracket.(A-1)
13-6
Re-
install and completely tighten the hardware.
A
A-1
M
C-3
C-4