Schwinn 430i Elliptical Assembly and Owner's Manual - Page 5

Specifications 71.5 cm ( 28.2" ) 160.5 cm ( 63.2" ) 178.1 cm ( 70.1" ) Maximum User Weight: 136 kg ( 300 lbs. ) Machine Weight: 74.5 kg ( 164.2 lbs. ) Total Surface Area (foot print) of equipment: 12734.2 cm2 ( 1976.8 inches2 ) Power Requirements: Operational Voltage: 220V - 240V AC, 50Hz Operating Current: 0.4A Regulatory Approvals: This product conforms to the applicable EN ISO 20957 International Standards for Stationary Training Equipment, Class H. DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product, please follow the prescribed methods at an approved waste center. Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 193.4 cm x 300 cm ( 76.2" x 118.1" ). Be sure that the workout space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline of the elliptical machine. Basic Assembly Tips Follow these basic points when you assemble your machine: • Read and understand the "Important Safety Instructions" before assembly. • Collect all the pieces necessary for each assembly step. • Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless 1.93m ( 76.2" ) instructed otherwise. • When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. • The assembly can require 2 people. 0.6m ( 24" ) 3.0m ( 118.1" ) 0.6m ( 24" ) 0.6m ( 24" ) 0.6m ( 24" ) 5