Seagate DB35.4 DB35.4 Series SATA Product Manual - Page 12
Formatted capacity, Default logical geometry, Recording and interface technology - hard drive
View all Seagate DB35.4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2.2 Formatted capacity Model ST3250310CS Formatted capacity* 250 Gbytes Guaranteed sectors 488,397,168 Bytes per sector 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing the drive in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48bit addressing support of drives with capacities over 137 Gbytes. 2.3 Default logical geometry Cylinders 16,383 Read/write heads 16 Sectors per track 63 LBA mode When addressing the drive in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. 2.4 Recording and interface technology Interface Recording method Recording density (kbits/inch max) Track density (ktracks/inch avg) Areal density (Gbits/inch2 avg) Internal data transfer rate (Mbits/sec max) Sustained data transfer rate (Mbytes/sec max) I/O data-transfer rate (Mbytes/sec max) Serial ATA (SATA) Perpendicular 1,049 155 163 1,212 106 300 6 DB35.4 Series SATA Product Manual, Rev. C