Seagate DB35.4 DB35.4 Series SATA Product Manual - Page 14
Power specifications
View all Seagate DB35.4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 4 on page 18. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed. • Idle mode power Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location. • Operating (CE seek profile) Operating power is measured by simulating a typical PVR operating environment, using a 50% write 50% read algorithm. • Standby mode During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down mode. Table 2: DC power requirements Power dissipation Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps Spinup - - 2.0 (peak) Idle* 5.33 0.415 0.272 Operating (CE seek profile) 7.97 0.641 0.397 Standby 1.06 0.115 0.040 Sleep 1.06 0.115 0.040 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. 8 DB35.4 Series SATA Product Manual, Rev. C