Seagate ST340014AS Product Manual - Page 29
Drive mounting
View all Seagate ST340014AS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 5 on page 22 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling. • Use only 6-32 UNC mounting screws. • The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 inch-lb). Barracuda 7200.7 Serial ATA Product Manual, Rev. N 21
Barracuda 7200.7 Serial ATA Product Manual, Rev. N
21
3.4
Drive mounting
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the
bottom-mounting holes. See Figure 5 on page 22 for drive mounting dimensions. Follow these important
mounting precautions when mounting the drive:
•
Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.
•
Use only 6-32 UNC mounting screws.
•
The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes.
•
Do not overtighten the mounting screws (maximum torque: 6 inch-lb).