Seagate ST340014AS Product Manual - Page 32

4.2 Serial ATA device plug connector pin definitions Table 8 summarizes the signals on the Serial ATA interface and power connectors. Table 8: Serial ATA connector pin definitions Segment Pin S1 S2 S3 S4 S5 S6 Signal S7 Function Ground A+ AGround BB+ Ground Definition 2nd mate Differential signal pair A from Phy 2nd mate Differential signal pair B from Phy 2nd mate Power Key and spacing separate signal and power segments P1 V33 3.3V power P2 V33 3.3V power P3 V33 3.3V power, pre-charge, 2nd mate P4 Ground 1st mate P5 Ground 2nd mate P6 Ground 2nd mate P7 V5 P8 V5 P9 V5 P10 Ground 5V power, pre-charge, 2nd mate 5V power 5V power 2nd mate P11 Reserved The pin corresponding to P11 in the backplane receptacle connector is also reserved The corresponding pin to be mated with P11 in the power cable receptacle connector shall always be grounded P12 Ground 1st mate. P13 V12 P14 V12 P15 V12 12V power, pre-charge, 2nd mate 12V power 12V power Notes: 1. All pins are in a single row, with a 1.27 mm (0.050") pitch. 2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are: • the ground pins P4 and P12. • the pre-charge power pints and the other ground pins. • the signal pins and the rest of the power pins. 24 Barracuda 7200.7 Serial ATA Product Manual, Rev. N