Seagate ST800FM0012 Pulsar Serial ATA Product Manual - Page 10
Drive specification, ST9200011FS, ST9100011FS, ST950011FS
View all Seagate ST800FM0012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Drive specification Sustainable 4KB Random IOPs for 5 year Endurance (65%/35% R/W 70% Duty Cycle) Startup current (typical) 5V (peak) Voltage tolerance (including noise) Ambient temperature Temperature gradient (°C per hour max) Relative humidity Relative humidity gradient Wet bulb temperature (°C max) Altitude, operating Altitude, nonoperating (below mean sea level, max) Operational Shock (max at 0.5ms) Non-Operational Shock (max at 0.5ms) Vibration, random operating Vibration, random nonoperating Nonrecoverable read errors, max Annualized Failure Rate (AFR) Warranty Lifetime Power cycles Supports Hotplug operation per Serial ATA Revision 2.6 specification ST9200011FS ST9100011FS ST950011FS 10,500 0.83 amps 5V ± 5% 5° to 60°C (operating) -40° to 70°C (nonoperating) 20°C (operating) 20°C (nonoperating) 5% to 95% (operating) 5% to 95% (nonoperating) 20% per hour max 37.7 (operating) 40.0 (nonoperating) -60.96 m to 3048 m (-200 ft. to 10,000+ ft.) -60.96 m to 12,192 m (-200 ft to 40,000+ ft) 1500 Gs 1500 Gs 20-2000 Hz: 16 Grms 20-2000 Hz: 16 Grms 1 LBA per 1016 bits read 0.44% To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp You will be asked to provide the drive serial number, model number (or part number) and country of purchase. After submitting this information, the system will display the warranty information for your drive. 50,000 Yes *One GB equals one billion bytes when referring to drive capacity. Accessible capacity may vary depending on operating environment and formatting. 4 Pulsar Product Manual, Rev. A