Sennheiser MOMENTUM True Wireless 2 Instruction manual MOMENTUM True Wireless - Page 16

Using the earphones Connecting the earphones to a Bluetooth device To be able to use the Bluetooth wireless connection, you must register both devices (earphones and e.g. smartphone) via the device settings of your smartphone. This process is called pairing. If operation differs from the steps mentioned, also refer to the instruction manual of the Bluetooth device you are using. When you switch on the earphones for the first time after initial charging, they automatically switch to pairing mode. Information on the Bluetooth wireless connection The earphones are compatible with Bluetooth 5.1. If your audio source supports one of the following high-resolution audio encoding methods, music is automatically played in high audio quality: aptX® or AAC. Otherwise the headphones will play your music in normal audio quality (SBC). Paired devices establish the Bluetooth wireless connection immediately after switch-on and are ready for use. When you switch the earphones on, they automatically try to connect to the last connected Bluetooth device. The earphones can save the connection profiles of up to eight Bluetooth devices with which they have been paired. If you pair the earphones with the ninth Bluetooth device, the saved connection profile of the least used Bluetooth device will be overwritten. If you want to re-establish a connection with the overwritten Bluetooth device, you have to pair the earphones again. Using the Smart Control app, you can view the list of paired devices and selectively connect and disconnect devices ("Connections"; > 18). Paired and connected Bluetooth device Paired Bluetooth device (currently not connected) 16 | MOMENTUM True Wireless 2