Sennheiser MOMENTUM True Wireless 2 Instruction manual MOMENTUM True Wireless - Page 17

Using the earphones The right and the left earbud also use a Bluetooth wireless connection. Both earbuds are paired with each other upon delivery. If you use another earbud (e.g. a replacement earbud), the two earbuds must also be paired with each other (> 35). Pairing the earphones with a Bluetooth device 1 2 "Pairing" max. 1 m/40 inch 3s 3 ON 4 MOMENTUM TW2 "Pairing successful" 3x 1. Take both earbuds out of the charging case and insert them into your ears (> 21). The distance between the earbuds and the Bluetooth device should not exceed 40"/1 m. 2. Simultaneously touch and hold the right and the left touch control panel for 3 seconds until you hear the voice prompt "Pairing" and a beep. The LEDs of the earbuds flash blue and red. The earbuds are in pairing mode. 3. Activate Bluetooth on your Bluetooth device. 4. Via the menu of your Bluetooth device, start the search for new Bluetooth devices. All active Bluetooth devices in the proximity of your smartphone are displayed. From the list of found Bluetooth devices, select "MOMENTUM TW 2". If necessary, enter the default pin code "0000". If pairing was successful, you hear the voice prompt "Pairing successful" and the LEDs of the earbuds flash blue 3x. If no connection is established within 1 minute, pairing mode is terminated and the earbuds switch to idle mode. If necessary, repeat the steps described above. If the earphones are not paired with any Bluetooth device (the pairing list is empty), pairing mode is permanently active. MOMENTUM True Wireless 2 | 17