Sennheiser MOMENTUM True Wireless 2 Instruction manual MOMENTUM True Wireless - Page 18

Using the earphones Switching the connection to paired Bluetooth devices/"Connections" To selectively switch the audio connection to paired Bluetooth devices using the "Connections" function, you require the Smart Control app (> 20). ▷ In the Smart Control app, tap "Connections". The list of Bluetooth devices paired with the earphones appears. ▷ From the list, select the paired device to which you want to con- nect the earphones. Make sure that the desired device is switched on and Bluetooth is activated. The Bluetooth connection for audio between the desired Bluetooth device and the earphones is established. The app connection between the device with the Smart Control app installed and the earphones remains active (only Bluetooth Low Energy for communication between app and earphones, the device name is marked on bold letters). Disconnecting the earphones from a Bluetooth device ▷ Via the menu of your Bluetooth device, disconnect the connection to the earphones. The earphones are disconnected from the Bluetooth device. The earphones then search for other paired devices. If no device is found, you hear the voice prompt "No connection". The earphones switch to idle mode. Using the "Connections" function in the Smart Control app, you can also selectively connect the earphones to paired devices without terminating an existing connection (> 35). If you want to clear the Bluetooth pairing list of the earphones, reset the earphones to the factory default settings (> 35). Pairing the earbuds with each other (optional) The right and the left earbud are paired with each other upon delivery. If, however, you are using a different earbud (e.g. a spare earbud), you have to pair the two earbuds with each other once: 1. Make sure that the right earbud is not connected to any Bluetooth device. Deactivate Bluetooth on your Bluetooth device or delete "MOMENTUM TW 2" from the list of paired devices in the Bluetooth menu of your Bluetooth device. 2. Charge the right and the left earbud (> 15). 3. Take both earbuds out of the charging case and make sure that the right and the left earbud are close together (max. distance 50 cm). The LEDs of the earbuds light up red. 18 | MOMENTUM True Wireless 2