Sharp 172A-W Operation Manual - Page 17
Connection of headphones, commercially available, Connecting the monitor to a power, source, Turning - 17 lcd monitor
UPC - 074000046115
View all Sharp 172A-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English Connecting the monitor and turning the monitor on and off Connection of headphones (commercially available) Headphones (commercially available) can be connected. Headphone terminal Turning the power on 1. Turn on the main power of the monitor. Main power switch Français Deutsch Italiano Español English Headphones Notes: - When the headphones are connected, no sound can be heard from the monitor speakers. - Use headphones with a cable less than 3 m in length. Connecting the monitor to a power source - When switching the main power switch on and off, always wait for an interval of at least 5 seconds. Rapid switching may result in malfunction. 2. Press the monitor's power button. 3. Turn on the computer. Press power button. Turn on the computer power supply. ON Power terminal AC outlet Power cord When a signal is input from the computer, the power LED lights up green, and the screen is displayed. (After power is turned on, it may take a little time until the screen is displayed.) Note for LL-172G: - If the input terminal to which the computer is connected has not been selected, the screen will not be displayed. If necessary, perform input terminal switching. (p.18) Notes: - When using an analog signal, perform an automatic screen adjustment under the following conditions (p.21): - Using the monitor for the first time. - After having changed the system settings during use. - When using the LL-172G with a digital connection, automatic screen adjustment is unnecessary. - Depending on the type of computer or OS, you may need to install the monitor set-up information on your system. (p.31) - When connecting to a notebook, if the notebook computer's screen is set to display at the same time, the MS-DOS screen may not display properly. In this case, change the setting to display only the LCD monitor. 17