Sharp 20F640 User Manual - Page 38
Using the Video and Audio Input Jacks Continued
View all Sharp 20F640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Using the Video and Audio Input Jacks (Continued) (Rear connection terminals of TV) Video Equipment with Component Video (Component Color) Output Jacks (Y, PB and PR) To AUDIO OUTPUT (L/R) To COMPONENT VIDEO OUTPUT Jacks IN 1 COMPONENT Y PB PR R AUDIO L LINE OUT R VIDEO L Video Equipment To AUDIO OUTPUT (L) To AUDIO OUTPUT (R) To VIDEO OUTPUT L To watch video material playback. • Press the Remote's INPUT button to select the VIDEO INPUT mode for the video equipment you wish to play. • The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed. AIR INPUT 1 (or COMPONENT) or (IN 1) CABLE Rear INPUT 2 (IN 2) Front • When the AV cables are being connected to the VIDEO INPUT 1 and COMPONENT Y terminals simultaneously, the COMPONENT terminal has priority over the VIDEO terminal. • INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest channel. Note: • When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected. • It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be obtained from copyright owners whenever necessary. • For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. • The connection cords can be obtained from your local video store. 38