Sharp 32SC260 Operation Manual - Page 12

Changing Viewing Channel • Please note: your new Television is capable of receiving the full range of AIR-TV channels available today, from the most advanced digital channels, to the more traditional analog channels. As the transition toward full digital TV continues, some AIR-TV systems in the USA will have a mixture of analog and digital channels in their lineups. H You can change channels in several ways. Method 1 Using CH a/s on the remote control unit or on the TV set. CH CH (On the Set) MENU button DIGITAL 10.1 AUDIO: ENGLISH (while viewing digital channel) VOLUME CHANNEL UP ( )/ DOWN ( ) MENU �� ��� (while viewing analog channel) Method 2 (i) Press FLASHBACK to switch to the previously tuned channel. (ii) Press FLASHBACK again to switch back to the currently tuned channel. Note: FLASHBACK • FLASHBACK will not work if no channel has been changed after TV is turned on. Method 3 Using REMOTE KEYPAD buttons (0-9 and ENTER) to select up to 125 channels for VHF/UHF/ CATV. To select a 1 or 2-digit analog channel number (e. g., Channel 5): ��� 5 5 Press 5 → ENTER Note: • When selecting a 1-digit channel number, it is not necessary to press 0 before the number. • When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds. To select a 3-digit analog channel number (e. g., Channel 115): 1 11 115 Press 1 → 1 → 5 → ENTER Note: • When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds. • If you push "0" by itself, nothing will happen. To select a digital channel number (e. g. Channel 10.1): 1 10 10. Press 1 → 0 → • (DOT) → 1 → ENTER Note: 10.1 DIGITAL 10.1 AUDIO: ENGLISH • Complete the above steps within a few seconds. • When you enter 0-9 and • (DOT), channel selection will be made if there is no operation for a few seconds. 12 Dimension: 140 X 215 mm