Sharp 32SC260 Operation Manual - Page 33

Set Up (Continued) 7 Once EZ SETUP is complete, the lowest channel number 2 memorized will be displayed. H Channel Setting If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 Press MENU to access the MAIN MENU screen. 2 Press CH a/s to move the "E" mark to "SET UP". CH → CH MENU SLEEP T I MER V I DEO ADJ UST AUD I O SEL ECT D I G I TAL AUD I O CC CLOSED CAPT I ON PARENT CONTROL ES ENERGY SAVE SET UP (MAIN MENU screen) 3 Press VOL k/l to access the SET UP screen. 4 Press CH a/s to move the "E" mark to "CH SETTING". CH VOL - → VOL + CH 5 Press VOL k/l to access the CH SETTING screen. Note: • If the viewing channel is an analog channel, Antenna Setup Digital cannot be selected. • During Cable mode, Digital Channel Search and Antenna Setup Digital cannot be selected. VOL VOL - + (SET UP screen) (CH SETTING screen) 6 Press CH a/s to move the "E" mark to "AIR/ANALOG CABLE", then press VOL k/l to access the AIR/CABLE screen. CH VOL VOL →- + CH 7 Press CH a/s to move the "E" mark to the desired mode. AIR CABLE STD CABLE HRC CABLE IRC CH A IR/ ANALOG CABLE A IR CABLE STD CABLE HRC CABLE I RC CH (AIR/CABLE screen) 8 Press MENU to exit. Note: • Receivable channels of your TV set are: AIR channels: VHF: 2 through 13. UHF: 14 through 69. CABLE channels: 1 (HRC and IRC mode only) 2 through 125 (STD, HRC and IRC) 33 Dimension: 140 X 215 mm