Sharp AL-1250 AL-1220 AL-1250 Operation Manual - Page 28
Displaying Total Number Of Copies
UPC - 074000072374
View all Sharp AL-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
USER PROGRAMS 3 Press the print ( ) key. The entered program number will be steadily lit and the currently selected parameter number for the program will blink on the right side of the display. 4 Select the desired parameter using the right copy quantity ( ) key. The entered parameter number will blink on the right of the display. Program No. Mode Parameters 1 Auto clear time 0 e OFF 1 e 30 sec. * 2 e 60 sec. 3 e 90 sec. 4 e 120 sec. 5 e 10 sec. 2 Preheat mode 0 e 30 sec. 1 e 60 sec. * 2 e 90 sec. 3 Auto power shut- 0 e 2 min. * 1 e 5 min. 2 e 15 min. off timer 3 e 30 min. 4 e 60 min. 5 e 120 min. 4 Stream feeding 0 e OFF * 1 e ON mode 5 Auto power shut- 0 e OFF * 1 e ON off mode 4 Factory default settings are indicated with an asterisk (*). 5 Press the print ( ) key. The right-hand number in the display will be steadily lit and the entered value will be stored. Special functions To change the setting or to set another mode, press the clear ( ) key. The copier will return to step 2. 6 Press the light ( ) or dark ( ) key to return to the normal copy mode. DISPLAYING TOTAL NUMBER OF COPIES Use the following procedure to display the total number of copies. 1 Press the clear ( ) key to reset the display to zero. 2 Press and hold down the clear ( ) key for approximately 5 seconds.The total number of copies will appear in two steps, each with three digits. Example: Total number of copies is 1,234. 27