Sharp AR-P450 AR-P350 AR-P450 Operation Manual - Page 73
Solution or cause, Check, Problem
View all Sharp AR-P450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
TROUBLESHOOTING Problem Black pages Black and white areas are reversed. Printer prints in reverse order. Check q Iss a color on color image being printed? q Negative image printing? q Is the reverse order selected in the application software? Solution or cause Some color on color images may be printed as all black. Check print driver setting. Cancel the reverse order printing in the application software. Printer stops in the middle of a print job. q Too much paper in the exit tray? Remove the paper from the exit tray. Printing is not on desired paper size. q Is the printer out of paper? q Is paper selection of driver "Auto"? Load paper. Ensure that the desired paper is set in a paper tray of the printer and select "Auto" 4 in the paper selection of the printer driver. Printer resident font cannot be selected from the application software when the PPD file of an optional PS3 expansion kit is used in Windows (except NT) environment. q Has the resident font information been installed? Install (or reinstall) the resident font information. (page 2-14) Printer write error occurs when printing from the parallel port. q Is the timeout time set to be too short in the printer driver? Set a longer time in the timeout setting in the printer driver. Only one set has been output when more than one set has been specified. q Is the size of the file being printed too large for the available memory? Check for a printed notice page. The print file size exceeds storage capacity of this printer. Print additional sets one at a time. Installation of a hard disk drive will enable printing of larger size files. Two-sided printing is specified but only a notice page is printed. q Two-sided printing of a large number of pages is specified? The print file size exceeds storage capacity of this printer. Installation of a hard disk drive will enable printing of large size files. Printed image is too light or too dark. q Is the exposure control set properly? The printer exposure level can be adjusted by using a key operator program. Contact your key operator. (page 11 of the Key Operator's Guide.) 4-9