Sharp AR-P450 AR-P350 AR-P450 Operation Manual - Page 80
Setting the printer driver for duplex, module, bypass tray and exit tray, DUPLEX MODULE, Copying
View all Sharp AR-P450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
DUPLEX MODULE Setting the printer driver for duplex module, bypass tray and exit tray When using the duplex module (including the bypass tray and the exit tray) for printing, select "Properties" and make selections as follows for the print job. The screens used in the following descriptions are for a PCL driver in the Windows 98 environment. s Two-sided printing Open the "Main" tab and check the radio button of the desired two-sided printing mode. Copying in the duplex mode For copying in the duplex mode, press the COPY key on the operation panel and make all selections on the copy mode basic screen. s Automatic duplex copying Touch the [2-SIDED COPY] key on the copy mode basic screen. A selection screen for two-sided copying will appear. s Using the bypass tray Touch the [PAPER SELECT] key on the copy mode basic screen. A selection screen for paper source will appear. Select the bypass tray on this screen. s Using the exit tray Touch the [OUTPUT] key on the copy mode basic screen. A selection screen for output will appear. Select the exit tray mounted to the duplex module on this screen. s Using the bypass tray Open the "Paper" tab shown in the illustration below and select "Bypass Tray" in the "Paper Selection" drop down. s Using the exit tray mounted to the duplex module Open the "Paper" tab shown in the illustration below and select "Left Side Tray" in the "Output" drop down. NOTES q The settings screens above will appear only if the devices have been set properly in the printer driver configuration (see NOTE on page 2-5). q The combination of paper selection and other functions may not be compatible. For instance, if heavy paper, envelopes, label stock, etc. are selected, it will not be possible to select duplex, offset tray, saddle stitch, etc. For details, see printer driver help. 5-4