Sharp AR-P450 AR-P350 AR-P450 Operation Manual - Page 99
Disposal of hole punch scrap
View all Sharp AR-P450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
SADDLE STITCH FINISHER 9 Turn roller rotating knob A in the direction of the arrow to move the staple unit to the front. Roller rotating knob A Turn the roller rotating knob until the triangle mark is aligned with the index. Staple unit 10 Remove the staple box. 12 Return the lever to its original position. 13 Reinstall the staple box. Push the staple box in until it clicks into place. 11 Raise the lever at the end of the staple box. Remove the top staple if it is bent. If bent staples remain, a staple jam will occur again. 14 Push the stapler section back into the finisher. 15 Close the front cover. 16 5 Push the saddle stitch finisher back against the printer. NOTE Make a test print or copy in the staple sort mode to ensure that stapling is performed properly. s Disposal of hole punch scrap 1 Unlatch the saddle stitch finisher and slide it away from the printer. 3 Return the punch scrap collecting container to its original position. 2 Pull out the punch scrap collecting container and empty it. 4 Push the saddle stitch finisher back against the printer. 5-23