Sharp KB-3300JW KB-3000JS , KB-3300JK , KB-3300JW Operation Manual - Page 20

MICROWAVE DRAWER COOKING MULTIPLE SEQUENCE COOKING Your Microwave Drawer can be programmed for up to 4 automatic cooking sequences, switching from one power level setting to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your Microwave Drawer can do this automatically. 1 First enter cooking time. Then touch Power Level pad once for 100% cooking or repeat touching Power Level pad for a lower power level. 2 Enter second cooking time. Repeat touching Power Level pad for desired level. You can follow this procedure up to 4 times. TOUCH START 3 Touch START/Minute Plus pad. Note: • If Power Level pad is touched once, HIGH will be displayed. • If 100% is selected as the final sequence, it is not necessary to touch the Power Level pad. • If you wish to know power level during cooking, simply touch the Power Level pad. As long as your finger is touching the Power Level pad, the power level will be displayed. • Micro Warm can be programmed even if 4 cooking sequences have been set. HELP Each setting of Sensor Reheat, Sensor Cook, Sensor Popcorn, Micro Warm, Reheat and Defrost has a cooking hint. If you wish to check, touch Custom Help whenever HELP is lighted in the Interactive Display for these and other manual operation hints. MINUTE PLUS™ Minute Plus allows you to cook for a minute at 100% by simply touching the Minute Plus pad. You can also extend cooking time in multiples of 1 minute by repeatedly touching the Minute Plus pad during manual cooking. Note: • To use Minute Plus, touch pad within 3 minutes after cooking, closing the door or touching the Stop/Clear pad. • Minute Plus cannot be used with Sensor settings, Reheat or Defrost. MORE OR LESS TIME ADJUSTMENT Should you discover that you like any of the Sensor, Reheat or Defrost settings slightly more done, touch the Power Level pad once after touching your selection. The display will show MORE . For slightly less done, touch the Power Level pad twice after touching your selection. The display will show LESS . AUTO START If you wish to program the Microwave Drawer to begin cooking automatically at a designated time of day, follow this procedure. 1 Touch Setup/Custom Help pad 4 times. The display shows AUTO START MICRO TOUCH START 2 Touch START/Minute Plus pad. ENTER START TIME 3 Enter start time. 4:30 TOUCH CLOCK 4 Touch Timer/Clock pad. ENTER COOKING TIME 5 Touch the number pads to enter cooking time. 20.00 TOUCH START OR TOUCH POWER LEVEL Touch Power Level pad repeatedly until the desired power level is reached. TOUCH START 6 Touch START/Minute Plus pad. AUDIBLE SIGNAL ELIMINATION If you wish to have the Microwave Drawer operate with no audible signals, see page 25. END OF COOKING REMINDER At end of cooking, the Microwave Drawer will signal every 10 seconds for the first minute; then every 3 minutes until the Stop/Clear pad is touched, the Microwave Drawer is opened or up to 1 hour. This can be canceled. See page 25. 20