Sharp KB-3425JW KB-3425JS , KB-3425JK , KB-3425JW Operation Manual - Page 19

MICROWAVE DRAWER COOKING MULTIPLE SEQUENCE COOKING The Microwave Drawer can be programmed for up to four automatic cooking sequences, switching from one power level setting to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your oven can do this automatically. • Suppose you want to cook roast beef for 5 minutes at 70% power and then continue to cook for 30 minutes at 50% power . 2:40 PM DEC 22 Convection Reheat Bake Defrost Broil Micro Cook 1 Enter cooking time by touching 2 Touch Power Level 3 times to choose 3 Note that 100% stage 2 appears in the number pads 500. 70%. You can omit this step when you set banner. 100% power. Touch Multiple Sequence. 2:40 PM DEC 22 Convection Reheat Bake Defrost Broil Micro Cook 4 Enter second cooking time 3000. 5 Touch Power Level until 50% Stage 2 appears in the display. Touch START. 6 The display will begin counting down the total cooking time. During cooking, the power level will appear in the display. At the end of Stage 1, the microwave will automatically change to Stage 2. TO SET POWER LEVEL There are eleven preset power levels. Using lower power levels increases the cooking time, which is recommended for foods such as cheese, milk and long slow cooking of meats. Consult a microwave cookbook or recipes for specific recommendations. TOUCH POWER LEVEL PAD NUMBER OF TIMES FOR DESIRED POWER APPROXIMATE COMMON PERCENTAGE WORDS FOR OF POWER POWER LEVELS If Power Level is not touched Power Level x 1 Power Level x 2 Power Level x 3 Power Level x 4 Power Level x 5 100% 90% 80% 70% 60% 50% High Medium High Medium TOUCH POWER LEVEL PAD NUMBER OF TIMES FOR DESIRED POWER APPROXIMATE PERCENTAGE OF POWER COMMON WORDS FOR POWER LEVELS Power Level x 6 Power Level x 7 Power Level x 8 Power Level x 9 Power Level x 10 Power Level x 11 40% 30% 20% 10% 0% 100% Med Low /Defrost Low High 19