Sharp LC-26SH12U Service Manual - Page 14

Servicing Fixtures And Tools, Re-write For Digital Soft Firmware - driver

Get Sharp LC-26SH12U - 26inch LCD HDTV PDF manuals and user guides
UPC - 074000370012
View all Sharp LC-26SH12U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

SERVICING FIXTURES AND TOOLS JG176 2007 USA DTV LCD ROM DISC Ref. No. JG176 Part No. APJG176121 Parts Name 2007 USA DTV LCD ROM DISC Remarks Up-Date of the Firmware RE-WRITE FOR DIGITAL SOFT FIRMWARE 1. Copy the "update.dat" in CD to USB Flash Memory. Recommended USB Flash Memory • SanDisk Cruzer Mini USB Flash Drive 128Mb • SanDisk Cruzer Mini USB Flash Drive 256Mb • SanDisk Cruzer Micoro USB Flash Drive 128Mb • SanDisk Cruzer Micoro USB Flash Drive 256Mb • TwinMos ModileDisk3 128Mb (USB 2.0) • TwinMos ModileDisk3 256Mb (USB 2.0) NOTE: After Format is done with FAT32 File system beforehand, USB Flash Memory is used. The computer of WINDOWS2000 is used. 2. Confirm that the AC cord is plugged out. 3. Set the minus driver to the topside of the USB connector cover, remove the USB connector cover. Insert the USB Flash Memory to USB connector. (Refer to Fig.1) SET (REAR) USB connector cover Fig.1 4. Insert the AC CORD of the set and turn on the power. The Up-Date will start automatically. During the writing, "PLEASE WAIT" will appear on the screen. 5. After the Up-Date, the screen will return to normal screen. 6. Turn off the power. 7. Unplug the AC CORD, and remove the USB Flash Memory. 8. Insert the AC CORD again. After the data input, set to the initializing of shipping. 9. Turn on the power. 10. Press both Channel button (1) on the remote control and the VOLUME DOWN button on the set for more than 2 seconds. The unit will now have the correct DATA for the new DIGITAL SOFT FIRMWARE. C-2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
C-2
SET (REAR)
SERVICING FIXTURES AND TOOLS
Ref. No.
Part No.
Parts Name
Remarks
JG176
Up-Date of the Firmware
APJG176121
JG176
2007 USA DTV LCD
ROM DISC
2007 USA DTV LCD
ROM DISC
USB connector cover
Copy the "update.dat" in CD to USB Flash Memory.
Recommended USB Flash Memory
• SanDisk Cruzer Mini USB Flash Drive 128Mb
• SanDisk Cruzer Mini USB Flash Drive 256Mb
• SanDisk Cruzer Micoro USB Flash Drive 128Mb
• SanDisk Cruzer Micoro USB Flash Drive 256Mb
• TwinMos ModileDisk3 128Mb (USB 2.0)
• TwinMos ModileDisk3 256Mb (USB 2.0)
NOTE:
1.
2.
3.
After Format is done with FAT32 File system beforehand, USB Flash Memory is used.
The computer of WINDOWS2000 is used.
Confirm that the AC cord is plugged out.
Set the minus driver to the topside of the USB connector cover, remove the USB connector cover.
Insert the USB Flash Memory to USB connector.
(Refer to Fig.1)
Fig.1
Insert the AC CORD of the set and turn on the power. The Up-Date will start automatically.
During the writing, "PLEASE WAIT" will appear on the screen.
After the Up-Date, the screen will return to normal screen.
Turn off the power.
Unplug the AC CORD, and remove the USB Flash Memory.
Insert the AC CORD again.
After the data input, set to the initializing of shipping.
Turn on the power.
Press both Channel button (1) on the remote control and the VOLUME DOWN button on the set for more than 2 seconds.
The unit will now have the correct DATA for the new DIGITAL SOFT FIRMWARE.
4.
5.
6.
7.
8.
9.
10.
RE-WRITE FOR DIGITAL SOFT FIRMWARE