Sharp LC46D43U Service Manual - Page 22

Repeat until RGB - model

Get Sharp LC46D43U - Aquos - 720p LCD HDTV PDF manuals and user guides
UPC - 890552648849
View all Sharp LC46D43U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

LC-42D43U 2. Adjustment sequence (adjustment according to the G adjustment value of gradation 6) * Make sure the adjusting point gradations are correct since they are different for each model. Repeat until RGB become the target values. PC Set Set the light level to MAX with the light control command (SBSL0016 for 45). SBSL0016 Setting is complete. OK Multi point adjustment mode setting MSET0001 Multi point adjustment mode is set. OK Initialize adjustment values. MSET0004 Initialization is done. OK Adjustment gradation setting (point 6 = 230 gradation adjustment*) LEV60230 (WBI60920 Pattern display Adjustment values are set. OK Adjust RGB to the target xy values. MG6RXXXX MG6GXXXX MG6BXXXX * XXXX indicates the adjusted values between 0000 and 1023 (4 digit decimal number with zero fill). * In order to adjust by reducing the value, set the strongest color as the fixed color. * The default adjustment value of RGB is the parameter value of the WBI6 command multiplied by 2. The adjustment value is reflected in the image. Adjustment values are set. OK Adjustment gradation setting (point 5 = 215 gradation adjustment*) LEV50215 (WBI50860) Pattern display Adjustment values are set. OK Correction of G value MG5GXXXX When G is changed at gradation 6, calculate the ratio of the change and set the following value to XXXX: (the value set with WBI5) x 2 x (the ratio). Adjustment values are set. OK 3 - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
LC-42D43U
3 – 3
2.
Adjustment sequence (adjustment according to the G adjustment value of gradation 6)
*
Make sure the adjusting point gradations are correct since they are different for each model.
PC
Set
Set the light level to MAX with the light control command
(SBSL0016 for 45).
SBSL0016
Setting is complete.
OK
Multi point adjustment mode setting
MSET0001
Multi point adjustment mode is set.
OK
Initialize adjustment values.
MSET0004
Initialization is done.
OK
Adjustment gradation setting (point 6 = 230 gradation adjustment*)
LEV60230
(WBI60920
Adjust RGB to the target xy values.
MG6RXXXX
MG6GXXXX
MG6BXXXX
* XXXX indicates the adjusted values between 0000 and 1023
(4 digit decimal number with zero fill).
* In order to adjust by reducing the value, set the strongest color
as the fixed color.
* The default adjustment value of RGB is the parameter value of
the WBI6 command multiplied by 2.
Adjustment values are set.
OK
Adjustment gradation setting (point 5 = 215 gradation adjustment*)
LEV50215
(WBI50860)
Adjustment values are set.
OK
Repeat until RGB
become the target
values.
Pattern display
Adjustment values are set.
OK
Correction of G value
MG5GXXXX
When G is changed at gradation 6, calculate the ratio of the
change and set the following value to XXXX: (the value set with
WBI5) x 2 x (the ratio).
Adjustment values are set.
OK
Pattern display
The adjustment value is
reflected in the image.