Sharp MS702 Operation Manual - Page 11

■

Recording from CDs or MDs (Synchro recording)

●

Synchro recording is a method that detects the playback sound from the source

equipment. When sound is present, it automatically starts the recording. When the

source is silent, the recording will be paused.

1

Connect the external equipment.

(See page 8.)

2

Insert a recordable MiniDisc.

3

Press the REC button.

●

To record from a tuner, first tune in a

broadcast.

●

To record from a CD, first start playing

the track you want to record.

4

While playing sound from the external

equipment connected to this unit, press

the

or

button to adjust the

recording level.

●

Adjust the recording level so that the

maximum sound volume from the

source makes the reading swing some-

where between -4 dB and 0 dB.

●

To record from a CD, first adjust the

recording level. Then put the equip-

ment connected to this unit into the

playback stand-by mode.

5

Press the ENTER/F.PLAY/SYNCHRO

button.

6

Begin playback on the source equip-

ment.

●

Recording will begin automatically.

To interrupt recording:

●

When

the

source

equipment

is

stopped, the unit will enter the synchro

recording

stand-by

mode.

When

playback is resumed, a recording will

be resumed.

●

If a silence lasts for 3 seconds or more,

the recording will be paused.

●

Pressing the

button on this unit

(when in this mode) will cause the unit

to enter the recording stand-by mode

and cancel the synchro recording

mode.

Continued on the following page.

RECORDING USING THE CABLE INCLUDED WITH THE UNIT

0dB

-4dB

Flashing

10

MD-MS702

Sharp MS702 Operation Manual - Page 11

Recording Using The Cable Included With The Unit - md minidisc

Page 11 highlights